*mydirectindustry

INS

INS

Product catalog summary

Specifications:

Material: 3/4” (19mm) thick closed-cell, lightweight EPDM-based elastomeric material, fiber-free.
Temperature Range: Suitable for exposure from -297°F to 257°F (-57°C to 125°C).
R-value: 3.
Density: 3/6 Lbs/ft³.
Water Vapor Permeability: 0.10 perm-in (0.15 x 10^-12).
Water Absorption: Less than 5% by weight.
Flammability: UL-94 5 V-A, V-O rated.

Cost-effective and flexible thermal insulation suitable for pipes and vessels, easy to install, and suitable for a wide variety of environments including outdoor use, temperatures up to 257°F (125°C), food service, and UV resistance.

Product Highlights:

INS Closed Cell Elastomeric Thermal Insulation is designed for easy installation and environmental resilience.

Ordering Information:

INS11050: 11” (279mm) width, 50 ft (15.2m) length, for pipes up to 2.5” (64mm) O.D.
INS15050: 15” (381mm) width, 50 ft (15.2m) length, for pipes up to 4” (102mm) O.D.
INS48025: 48” (1219mm) width, 25 ft (7.6m) length, for vessels and large diameter pipes.

Insulation Tape:

INSTAPE-2: 2” (51mm) x 82ft (25m) roll, ideal for pipes and small vessels.
INSTAPE-3: 3” (76mm) x 82ft (25m) roll, ideal for large vessels.

Seam-Sealing Tape:

Adhesive tape required for sealing seams, suitable up to 180°F (82°C).

Foil Tape:

INSFOIL-3: 3” (76mm) x 180ft (55m) roll, provides extra environmental protection, suitable up to 300°F (149°C).

Contact Information:

BriskHeat, Your Heating Specialist since 1949. Toll-Free: 800-848-7673, Phone: 614-294-3376, Website: www.BriskHeat.com, Email: [email protected], Fax: 614-294-3807.

Catalog excerpts

Your Heating Specialist since 1949 INS Closed Cell Elastomeric Thermal Insulation Product Highlights Cost effective, flexible thermal insulation for pipes and vessels CLOTH HEATING AND INSULATORS Easy-to-install Suitable for wide variety of environments - Outdoor use - Temperatures up to 257°F (125°C) - Food service - UV resistant • 3/4” (19mm) thick closed-cell and lightweight EPDM based elastomeric material • Fiber free • Exposure temperature range: -297°F through 257°F (-57°C through 125°C) • R-value: 3 • Density: 3/6 Lbs/ft3 • Water vapor permeability: 0.10 perm-in (0.15 x 10-12) • Water absorption (weight %): Less than 5% • Flammability: UL-94 5 V-A. V-O Ordering Information: Insulation Part Number Installs around 2.5” (64mm) O.D. pipes and smaller Installs around 4” (102mm) O.D pipes and smaller Installs around vessels and large diameter pipes Foil Tape Adhesive aluminum tape for extra environmental protection. Up to 300°F (149°C) Part Number 3” (76mm) x 180ft (55m) roll. To protect insulation from environmental damage. Seam-Sealing Tape Adhesive tape required for sealing seams. Up to 180°F (82°C) Part Number 2” (51mm) x 82ft (25m) roll. Ideal for pipes and small vessels. 3” (76mm) x 82ft (25m) roll. Ideal for large vessels. Toll Free: 800-848-7673 Phone: 614-294-3376 w w w .BriskHeat. c o m Email: [email protected] Fax: 614-294-3807

Open the catalog to page 1

INS

INS

Catalog excerpts

All BRISKHEAT CORPORATION catalogs and technical brochures