CONTAINER HEATERS Your Heating Specialist since 1949 Gas Cylinder Warmers Product Highlights Improves Process Control and Reduces Wasted Condensed Gas • Creates convection current • Increases pressure inside cylinder Gases Known to Benefit from This Process • SF6 ,Propane, Nitrogen, Oxygen, BCl3, WF6, and HF Fits Most Gas Cylinders Full Surface Coverage Insulation Reduces Heat Loss Models for Hazardous Locations Class I Division 1 Groups B, C, and D • Self-regulating grounded heating element • Total watts: up to 150 • 150°F (66°C) maximum exposure temperature on heating surface • Available in 120 and 240 VAC • Frequency range: 50-60Hz • Insulation thickness • Sides: 2.0” (51mm) • Top: 0.5” (13mm) • Ambient temperature range: 30°F to 95°F (-1°C to 35°C) • Closure: hook and loop fastener like VELCRO® • Moisture and oil resistant • Capable of being used outdoors • Power lead type • Ordinary location model: SJOW cord • Hazardous location models: Teck 90 cable • Power lead length: 10-foot (3m) • Optional cylinder base insulation pad and valve cover to further reduce heat loss Toll Free: 800-848-7673 Phone: 614-294-3376 w w w .BriskHeat. c o m Email: [email protected] Fax: 614-294-3807

Your Heating Specialist since 1949 Ordinary Locations and Part Number Matrix CONTAINER HEATERS Ordering Information: Class I Division I Groups B, C & D GCW 15 43 150 1 1/2" (88mm) Gas Cylinder Warmer Model GCW- (for Ordinary Locations) HCW- (CSA Class I Division I Groups B,C & D) Diameter in inches HCW series Min / Max Sizes Diameter: Minimum: 8” (203mm) Maximum: 15” (381mm) Length: Minimum: 15” (381mm) Maximum: 51” (1295mm) Ordinary Location Models can be any size Cylinder Base Insulation Pad- Placed between cylinder and floor. Further insulates the cylinder from heatsinks such as a concrete...