FE General Purpose Constant-Wattage Heating Cable
3Pages

{{requestButtons}}

Catalog excerpts

FE General Purpose Constant-Wattage Heating Cable - 1

Your Heating Specialist since 1949 FE General Purpose Constant-Wattage Heating Cable Product Highlights Temperatures up to 400°F (204°C) Power remains constant regardless of temperature Can be cut-to-length at job site Heating Element TEFLON® Extruded Jacket Contact Module Point Flurocarbon Film Continous Marker Tape • Maximum exposure temperature is 400°F (204°C) • Moisture, chemical, flame, and radiation resistant • 12AWG bus wires • Dimensions 0.2” x 0.3” (5mm x 8mm) • 40lb (18kg) per 500-foot (152m) spool TEFLON® is a registered Trademark of DuPont used under license. CABLE / WIRE Ideal for wide range of general purpose applications: • Mid-range process temperature control for food and chemical processing • Water lines • Fire protection systems • Fuel oil • Condensate return • Hot water lines • Lines periodically purged with 250 psig steam TEFLON® Extruded Jacket Tinned Copper Overbraid Ordinary Locations Hazardous Locations: Class I, Division 2, Groups B, C, & D Class II, Division 2, Groups F, & G Class III, Division 2 Maximum Circuit Length in ft (m) Cable Approvals valid only when used with appropriate heating cable and installation accessories, and installed in accordance with all applicable instructions, codes, and regulations. Circuit Module Length in ft (m) Ordering Information: Part Number Matrix Ordinary locations (120, 240VAC only) Watts / ft: 3, 5, 8, 12 Voltage: 120, 208, 240, 277, 480 Braid Type: B- (tinned copper metal braid), SS- (stainless steel overbraid) See pages 17 -18 for power connection / termination kits, monitor light kits, and accessories. Cable Type 3 watts/ ft (10 watts/ m) 5 watts/ ft (16 watts/ m) 8 watts/ ft (26 watts/ m) 12 watts/ ft (39 watts/ m) When ordering, please allow a minimum of 1 module length extra for terminations. IMPORTANT: Temperature controller is required for this product. See pages 80 through 100 for options. Toll Free: 800-848-7673 Phone: 614-294-3376 w w w .BriskHeat. c o m

Open the catalog to page 1
FE General Purpose Constant-Wattage Heating Cable - 2

Your Heating Specialist since 1949 FE Connection / Termination Kits FECABSK: Splice Kit. 3-Lead pouches 3-Shrink tubes 3-Crimp barrels 3-Ring terminals 1-3 oz. Tube RTV sealant 1-Caution label 1-End pouch Enough to complete: Two end terminations and one power input connection, or one power input splice NOTE: Requires a double hub junction box FECABKC: Lead/ End Termination Kit 5-Lead pouches 5-End pouches 10-Shrink tubes Enough to complete: One in-line splice or one tee splice NOTE: Requires Pipe standoff, pipe straps, single hub junction box, and RTV silicone FECABLP: Lead Termination Kit....

Open the catalog to page 2
FE General Purpose Constant-Wattage Heating Cable - 3

Your Heating Specialist since 1949 Heating Cable Accessories Pipe Standoff Adhesive Tape Helps to isolate the cable from the insulation and provides intimate contact with surface to be heated. Description Pressure Sensitive Fiberglass Adhesive Tape: Size: 0.5” x 108’ (13mm x 38m) Temp Limit: 350°F (176°C) Aluminum Adhesive Tape: Size: 2” x 180’ (51mm x 55m) Temp Limit: 350°F (176°C) Aluminum Adhesive Tape: Size: 2” x 180’ (51mm x 55m) Temp Limit: 550°F (288°C) Part Number Part Number CABLE / WIRE Cast aluminum fitting. Pipe Straps Stainless steel pipe straps used to secure pipe standoff to...

Open the catalog to page 3

All BRISKHEAT CORPORATION catalogs and technical brochures

  1. GCW/HWC

    2 Pages

  2. ECONO

    1 Pages

  3. INS

    1 Pages

  4. NEW APPROVAL

    2 Pages

  5. general catalog

    128 Pages