CUTTER PUMPS
12Pages

CUTTER PUMPS

Cutter Pumps SFC620...2320 Axial/semi-open impellers Vol. del. at manom. del. head Current Speed *) Dimensions for SFC1820 Dimensions SFC2320 above flange as with SGL1420 2

The cutter pumps of the series SFC are capable of cutting aluminium chips and similar materials and pumping of these materials along with the coolant fluid. An agitator located at the pump suction helps to break up and separate any large bundles of chips or birds nests which reach the pump suction. The specially made cutting unit (> 60HRC) is cuting chips and the above located semi-open impeller allows with its large clearances to pump the particles along with the coolant fluid from the machine back to the filter. The SFC pumps are capable of handling chip to coolant ratios of up to 1.5% by...

Cutter Pumps SXC2824 Axial/semi-open impellers Vol. del. at manom. del. head Power Voltage (43~ pole) Current Speed

The cutter pumps of the series SXC are designed to handle low alloyed steels, machining steel and cast iron / aluminum combinations. Chips can also be in the shape of birds nests or chip bundles. The chips must be supplied to the suction inlet of the pump. The chips are being picked up by the agitator then broken up, if necessary, and then cut and delivered by the pump. The SXC pumps are equipped with the user-friendly 45 degree flange connection which allows for either vertical or horizontal pipe connection and the connection of a pressure gauge with G 1/4. For more information see lifting...

Cutter Pumps SPC820 Axial/semi-open impellers Vol. del. at manom. del. head Current Speed

The cutter pumps of the series SPC are designed to handle and reliably cut long, stringy plastic chips. Because of the higher number of cutting blades which results in an increased cutting frequency all chips are being consistently cut in small pieces. The SPC pumps are equipped with the user-friendly 45 degree flange connection which allows for either vertical or horizontal pipe connection and the connection of a pressure gauge with G 1/4. For more information see lifting pumps features SXC/SPC within the technical information section. Types of fluid coolants cooling/cutting oils Max. chip...

Horizontal End-Suction Pumps SBC820...1820 Axial/semi-open impellers SBC820...1120

Horizontal End-Suction Pumps are centrifugal inline pumps with a compact design where the impeller is mounted onto the extended motor shaft. These pumps are not self-priming and must be gravity fed. All pumps are equipped with double mechanical seal. This pump series is designed for horizontal installations next to a tank and are capable of cutting aluminium chips and similar materials and pumping of these materials along with the coolant fluid. An agitator located at the pump suction helps to break up and separate any large bundles of chips or birds nests which reach the pump suction....

Technical Information Lifting pump versions SFC | SBC Pumps of the SFC series have the following unique characteristics: Coolant Supply The SFC series cutter pumps are capable of cutting aluminum chips and similar materials and pumping of these materials along with the coolant fluid. An agitator located at the pump suction helps to break up and separate any large bundles of chips or birds nests which reach the pump suction. The hardened cutting unit (>60HRC) is cutting chips and other materials and the above located semi-open impeller allows with its large clearances to pump the particles...

Technical Information Lifting pump versions SXC | SPC Cutter Pumps SXC | SXC-R | SXC-H Conveyor Drive Coolant Supply The cutter pumps of the series SXC are designed to handle low alloyed steels, machining steel (SXC-H) and cast iron / aluminum combinations (SXC). Chips can also be in the shape of birds nests or chip bundles. The chips must be supplied to the suction inlet of the pump, which are then picked up by the agitator broken up if necessary, and then cut and delivered by the pump. Proper tank design which ensures that all chips get to the pump suction is critical for all pump types....

The Brinkmann Pumps network – This is the way to find us. BRINKMANN PUMPS has a global presence and direct representation throughout Europe, Asia and North America. This ensures quick response times, competent consulting personnel and the highest level of service, which Brinkmann Pumps is known for, anytime and anywhere. Visit our website – where you will find all the contact details for our representative offices. Visit us and convince yourself of our capabilities. Welcome to BRINKMANN PUMPS. BRINKMANN PUMPS K.H. Brinkmann GmbH & Co. KG Friedrichstraße 2 58791 Werdohl Germany Brinkmann...