GAGES SWiTCHES TRANSMITTERS 0|*Hi*pnJrLiC kn n zol^i- OTOHEMC MAX "PRESSURE JO i<Pa d ri ifV k(h : 7imc Measurement- and control engineering for filters, roompressure, -temperature and -humidity t*«o 2009 2010 CATALOGUE including price list Steuerungstechnik GmbH

Catalogue 2009/2010 Index Differential pressure measuring instrument with analogue scale MAGNEHELIC M2000______________________________________________________3 Differential pressure measuring instrument with analogue display (MAGNEHELIC) and analogue output signal for filter control GBA 604_ __________________________________________________13 Case and accessories for differential pressure measuring instrument MAGNEHELIC for different applications U150 AW-HA ASF____________________________________________4 Differential pressure measuring instrument with analogue display (MAGNEHELIC) and analogue...

The MAGNEHELIC differential pressure gauges in the 2000 series are particularly suitable for measuring positive, negative (vacuum) or differential pressures within a range of 60 Pa up to 30 kPa, and within a range from 30 Pa up to 10 kPa for mid-scale zero point indication. Except for the gauges with ranges 0-60 Pa and 0-100 Pa which must always be mounted in vertical position, other gauges can be mounted in any position from vertical to horizontal. However, they have to be zero-gauged after installation. The core of the M2000 differential pressure gauge is a magnetic coupling between diaphragm...

Case and accessories for differential pressure measuring instrument MAGNEHELIC for different applications Plastic casing U150 for surface mounting The M2000 Magnehelic differential pressure gauges can be integrated in a plastic casing (U150) for surface mounting. The plastic casing U150 consists of two parts: The front part houses the pressure gauge Magnehelic 2000 and is ready for connection. The rear part is readily utilisable for mounting without its front counter-piece at the respective measuring point by means of M4 cylinder head bolts. The front piece with the pressure gauge does not have...

MAGNEHELIC differential pressure gauges of the 2000 series fitted in a stainless steel case and bezel are preferably used in the pharmaceutical and chemical industry as well as in medical equipment. The design resists high over-pressure. The pressure difference is indicated purely mechanically. Electrical energy is not required. For more detailled specifications refer to data sheet M2000. Technical data_ Media compatibility Standard types Type Measuring range* Measuring ranges refer to data table Measuring accuracy ± 4.0 % at 0-60 Pa, ± 3.0 % up to 0-100 Pa, ± 2.0 % from 0-100 Pa or higher (of...

Differential pressure measuring instrument MAGNEHELIC 2000 mounted flush in a stainless steel panel for cleanroom application The flush-mounted MAGNEHELIC differential pressure gauges in the FM2000/FM2300 series with front panel and bezel made of stainless steel are preferably used in the pharmaceutical and chemical industry, in medical equipment as well as in industrial applications and system engineering. They are designed for flush integration in cleanroom panels or instrument panels. As the pressure gauges operate without any liquids, they operate reliably, resist pressure shocks and do not...

MD201MB Differential pressure measuring instrument with analogue scale and one switch-over contact for filter control MAGNEHEUC. 0 _ V, y ^ The well-proven MD201 MB combines a pressure gauge and a pressure switch and is therefore suited to control pressure differentials of filters used in cleanroom and climate technology. The MD201 MB instruments feature a high reading accuracy and repeatability. They can be used in negative pressure and/or overpressure conditions. This is essential for air halls or research/experimental laboratories which for safety reasons need to be kept above or below...

Differential pressure measuring instrument with analogue scale and two switch-over contacts for filter control The well-proven MD 202MB combines a pressure gauge and two pressure switches and is therefore especially suited to control pressure differentials of filters used in cleanroom and climate technology. The MD 202MB instruments feature a high reading accuracy and repeatability. They can be used in negative pressure and/or overpressure conditions. This is essential for air halls or research/experimental laboratories which for safety reasons need to be kept above or below atmospheric pressure...

Differential pressure measuring instrument with analogue scale (PHOTOHELIC) and two electronic switch-over contacts with SPDT relays The GB 3002 pressure measuring instruments have two electronic (continuously adjustable) setpoint indicators which can be set and read independently from each other. This ensures that the indication of the actual value is not affected mechanically in any way. The switch relays are actuated by two phototransistors to control low and high limit and are additionally amplified by two power relays. This system is free of dead band. The switch setting can be done from...

Differential pressure measuring instrument with analogue output signal for filter control Note for calibration: Calibration reports and factory certificates produced by DKD-approved and certified testing instruments (in compliance with DIN 10204) are available as an option. The measuring instruments are designed and calibrated by the manufacturer for vertical mounting orientation only. black pressure probe for tube 4 x 6/8 mm 83 97 120 108 four assemblyholes in the backside of the housing for cylinder head bolts M4 zeropotentiometer Technical data Media compatibility a ir or non-corrosive gases...

The differential pressure transmitter GB 604 MF 0.75 comes in a plastic housing and is ready for connection. It can be mounted on a surface or fitted into cleanroom intermediate ceilings. This measuring instrument is particularly suitable for recording and controlling pressure, especially in clean-rooms, laboratories and hospitals. Linear to the measuring range, the differential pressure transmitter issues an analogue output signal of 4-20 mA or 0-10 V which is available at the plug connectors where it can be tapped and processed further. The instrument is equipped with a stainless steel measuring...