Tubing Injector Drives TB045 TB065 TB113 Tubing Injectors for Oil and Gas Production

Tubing Injector Drives | TB045 INPUT SPLINE INPUT 8/16 PITCH 30° PA INPUT SPLINE 13T SPLINE 13T 8/16 PITCH 30° PA 13T 8/16 PITCH 30° PA FLAT ROOT SIDE FIT CLASS 6 FLAT ROOT SIDE FIT CLASS 6 PER ANSI B92.1-1970 PER ANSI B92.1-1970 OUTPUT ROTATION SA AS INPUT ROTATIO SPRING PIN TO MAINTAIN SPRING PIN TO MAINTAIN ALIGNMENT BETWEEN COVER ALIGNMENT BETWEEN COVER & HOUSING (2 PLACES) F OUTPUT SPLINE OUTPUT SPLINE 28T 5 MODULE 30° PA 28T 5 MODULE 30° PA N150 X 5 X 28 X 9H N150 X 5 X PER DIN 5480 28 X 9H DO NOT SCALE DRAWING - ALL DIMENSIONS ARE PRE-PAINT HOUSING MOUNTING HOLES .788 20.02 THRU Ø HOUSING...

TB045 Model Formula TB – Tubing Injector Drive Frame Size / Output Torque Capacity 45 - 398,000 lb-in (45,000 Nm) Max. Intermittent Housing Configuration B – Ø0.788/0.778 (14 Holes on 16 Hole Pattern) on Ø15.750 B.C. (400.05 mm) Output Configuration A – 29T 5/10 DP 30º PA per ANSI B (Internal) E – N160 X 5 X 30 X 9H per DIN 5480 Input Spline 5 – 13T, 8/16 F – W45 X 2 X 21 X 9g per DIN 5480 Special Features Z – None B – Cover Allowance for Sight Glass Special Features Z – None Reduction 60 – 60.38:1 42 – 42.17:1

Tubing Injector Drives | TB065 11.715 297.56     11.685 296.80 13.780 350.01     13.777 349.94 Ø 17.32  [439.9]  AS CAST 14.170 359.92  Ø    14.140 359.16 15.720 399.29  Ø    15.700 398.78 Ø 13.44  [341.4]  AS CAST  OUTPUT ROTATION SAME  AS INPUT ROTATION           O-RING TO BE   PROVIDED BY DANA (NOT SHOWN)   ...

TB – Tubing Injector Drive Frame Size / Output Torque Capacity 65 - 575,000 lb-in (65,000 Nm) Max Intermittent Housing Configuration A – Ø0.788/0.778 (16 Holes) on Ø15.750 B.C. (400.05 mm) Output Configuration A – 29T 5/10 DP 30° PA per ANSI B92.1 (Internal) E – N160 X 5 X 30 X 9H per DIN 5480 Input Spline 5 – 13T, 8/16 Special Features Z – None B – Cover Allowance for Sight Glass Special Features Z – None Reduction 71 – 70.94:1 78 – 78.17:1

Tubing Injector Drives | TB113  HUB MOUNTING FACE   10.492 [266.50]   Ø 11.83 [300.4]  INPUT SPLINE  13T 8/16 PITCH 30° PA  FLAT ROOT SIDE FIT CLASS 6  18.930 480.82     18.926 480.72 24.340   618.24  617.47 24.310  20.930   531.62 Ø   20.920 531.37 19.305   490.35 Ø   19.275 489.59 8.705 221.11     8.675 220.35   6.697 170.10   6.695 170.05...

TB – Tubing Injector Drive Frame Size / Output Torque Capacity 113 – 1,000,000 lb-in (113,000 Nm) Max. Intermittent Housing Configuration B – Ø22mm (22 Holes) on Ø22.385 B.C. (568.58 mm) Output Configuration B – 36T 6/12 DP 30°PA per ANSI B92.1 (Internal) Input Spline 5 – 13T, 8/16 Special Features Z – None B – Cover Allowance for Sight Glass Special Features Z – None Reduction 71 – 71.47:1 77 – 76.89:1 87 – 86.69:1 103 – 102.92:1

Spicer® Torque-Hub® is a registered trademark of Dana Limited. Dana.com/GrazianoFairfield Dana Incorporated Off-Highway Drive and Motion Technologies 2400 Sagamore Parkway South PO. Box 7940 Lafayette, Indiana 47903 USA Office: +1-765-772-4000 © 2019 Dana Limited. All rights reserved. DCORPTUBINJTB04565113 042019