Angle digital transducerTAC Mkll Series • Programmable digital device to measure tilt on one axis • Working range ±90°, ±135°, ±180° • MEMS technology angular sensor (no moving parts) • Factory programmed on custom request • Voltage, current, ratiometric or CAN bus output • Double device version in single housing • Hardware and software filters to remove vibrations and interferences • Inputs/outputs protected against polarity reversal, over voltages and short circuits • Housed in a tough and compact shell made of glass fiber reinforced Nylon 6 • Electrical connection with M12x1 connectors On request: • Customizable angle range Typical fields of application: mounted cranes, mobile cranes, aerial platforms, industrial automation and generic mobile machines. Technical data Power supply ” Device supply current (and max output load for 4 to 20 mA version) for single and double channel version Product image for illustration purposes only Angular range TAC Mkll v 1 142017 BPE Electronics reserves the right to modify the technical data anytime, without advise BPE Srl, Campagnola Emilia (RE), Italy | Tel.: +39 0522 662357 | Fax: +39 0522 653740 | Web: www.bpe

Angle digital transducer Ordering Code Transducer Channels Rotation Rotation Output Electrical CAN Mechanical type direction angles type connection termination fitting Rotation direction Rotation angles Output type Electrical connection Mechanical fitting Single channel_ Double channel_ Double channel with crossed signals Clockwise rotation direction_ Counterclockwise rotation direction Current output: 4 to 20 mA(44 if double) Ratiometric output: 10% to 90% V|N. Vin=+5 Vdc(55 if double) CAN output: CAN bus(77 if double) Voltage output: 0.5^4.5 Vdc. Vin=9^33 Vdc_(99...