SU IM SERIES
40Pages

Catalog excerpts

SU-IM-IE SUPPORTS AND CLUTCHES Technical Catalogue January

MECHANICAL CLUTCHES IM1 Mechanical clutch, cylindrical shaft flange for pump Gr.2-3/SAE A/SAE B ..2.03 ELECTROMAGNETIC CLUTCHES © 2018 Dana Brevini S.p.A. all rights reserved. Hydr-App, SAM Hydraulik, Aron, Brevini Hydraulics, BPE Electronics, VPS Brevini, OT Oiltechnology, logos are trademarks or are registered trademarks of Dana Brevini S.p.A. or other companies Dana in Italy and other countries. The technical features supplied in this catalogue are non binding and no legal action can be taken against such material. Dana Brevini will not be held responsible for information and...

Open the catalog to page 3

BREVINI Motion Systems SUPPORT WITH CYLINDRICAL SHAFT FOR PUMP GR.1 The SU/1-C, is suitable for driving Gr.1 hydraulic pumps and motors, with belts, chain or other transmission, in which heavy combined loads take place (axial and radial). The pump/motor Gr. 1, is directly flanged and connected by splined coupling (coupling to be ordered separately). MAXIMUM LOAD ON THE SHAFT FEATURES Minimum radial load (*) (*) Nominal values calculated according to ISO 281. For more information, contact our thecnical department.

Open the catalog to page 4

BREVINI Motion Systems SUPPORT WITH TAPERED SHAFT FOR PUMP GR.1 The SU/1-D, is suitable for driving Gr.1 hydraulic pumps and motors, with belts, chain or other transmission, in which heavy combined loads take place (axial and radial). The pump/motor Gr. 1, is directly flanged and connected by splined coupling (coupling to be ordered separately). MAXIMUM LOAD ON THE SHAFT FEATURES Minimum radial load (*) (*) Nominal values calculated according to ISO 281. For more information, contact our thecnical department.

Open the catalog to page 5

BREVINI Motion Systems SUPPORT WITH CYLINDRICAL SHAFT FOR PUMP GR.2 The SU/2-C, is suitable for driving Gr.2 hydraulic pumps and motors, with belts, chain or other transmission, in which heavy combined loads take place (axial and radial). The pump/motor Gr. 2, is directly flanged and connected by splined coupling (coupling to be ordered separately). MAXIMUM LOAD ON THE SHAFT Minimum radial load (1) SPARE PARTS ORDERING CODE Nominal values calculated according to ISO 281. For more information, contact our thecnical department.

Open the catalog to page 6

BREVINI Motion Systems SUPPORT WITH TAPERED SHAFT FOR PUMP GR.2 The SU/2-D (tapered shaft), is suitable for driving Gr. 2 hydraulic pumps and motors, with belts, chain or other transmission, in which heavy combined loads take place (axial and radial).The pump/motor Gr. 2, is directly flanged and connected by splined coupling (coupling to be ordered separately). MAXIMUM LOAD ON THE SHAFT Minimum radial load (1) SPARE PARTS ORDERING CODE Nominal values calculated according to ISO 281. For more information, contact our thecnical department.

Open the catalog to page 7

BREVINI Motion Systems REINFORCED SUPPORT, CYLINDRICAL SHAFT FOR PUMP GR.2 The SUR/2-C, is suitable for driving Gr. 2 hydraulic pumps and motors, with belts, chain or other transmission, in which heavy combined loads take place (axial and radial). The pump/motor Gr. 2, is directly flanged and connected by splined coupling (coupling to be ordered separately). MAXIMUM LOAD ON THE SHAFT FEATURES Minimum radial load (*) (*) Nominal values calculated according to ISO 281. For more information, contact our thecnical department.

Open the catalog to page 8

BREVINI Motion Systems REINFORCED SUPPORT, TAPERED SHAFT FOR PUMP GR.2 The SUR/2-D (reinforced support, tapered shaft), is suitable for driving Gr. 2 hydraulic pumps and motors, with belts, chain or other transmission, in which heavy combined loads take place (axial and radial). The pump/motor Gr. 2, is directly flanged and connected by splined coupling (coupling to be ordered separately). MAXIMUM LOAD ON THE SHAFT FEATURES Minimum radial load (*) (*) Nominal values calculated according to ISO 281. For more information, contact our thecnical department.

Open the catalog to page 9

BREVINI Motion Systems SUPPORT WITH CYLINDRICAL SHAFT FOR PUMP GR.3 The SU/3-C, is suitable for driving Gr.3 hydraulic pumps and motors, with belts, chain or other transmission, in which heavy combined loads take place (axial and radial). The pump/motor Gr. 3, is directly flanged and connected by splined coupling (coupling to be ordered separately). MAXIMUM LOAD ON THE SHAFT FEATURES Minimum radial load (*) (*) Nominal values calculated according to ISO 281. For more information, contact our thecnical department.

Open the catalog to page 10

^DANA^> Motion Systems SUPPORT WITH TAPERED SHAFT FOR PUMP GR.3 The SU/3-D (tapered shaft), is suitable for driving Gr. 3 hydraulic pumps and motors, with belts, chain or other transmission, in which heavy combined loads take place (axial and radial). The pump/motor Gr. 3, is directly flanged and connected by splined coupling (coupling to be ordered separately). Minimum radial load (*) (*) Nominal values calculated according to ISO 281. For more information, contact our thecnical department.

Open the catalog to page 11

BREVINI Motion Systems SUPPORT WITH CYLINDRICAL SHAFT FOR PUMP GR.3.5 The SU/3.5-C (cylindrical shaft), is suitable for driving Gr. 3.5 hydraulic pumps and motors, with belts, chain or other transmission, in which heavy combined loads take place (axial and radial). The pump/motor Gr. 3.5, is directly flanged and connected by splined coupling (coupling to be ordered separately). On this version, there is a external grease nipple. MAXIMUM LOAD ON THE SHAFT FEATURES Fr (N) 3800 3600 3400 3200 3000 2800 2600 2400 2200 2000 1800 1600 1400 1200 1000 Minimum radial load (*) (*) Nominal values...

Open the catalog to page 12

BREVINI Motion Systems SUPPORT WITH TAPERED SHAFT FOR PUMP GR.3.5 The SU/3.5-C, is suitable for driving Gr. 3.5 hydraulic pumps and motors, with belts, chain or other transmission, in which heavy combined loads take place (axial and radial). The pump/motor Gr. 3.5, is directly flanged and connected by splined coupling (coupling to be ordered separately). On this version, there is a external grease nipple. MAXIMUM LOAD ON THE SHAFT FEATURES Minimum radial load (*) (*) Nominal values calculated according to ISO 281. For more information, contact our thecnical department.

Open the catalog to page 13