Digital inclinometer SP Mkll Series • Programmable digital device to measure tilt on 360° degrees • Two analog outputs, X and Y axes • Working range ±20° • MEMS technology angular sensor (no moving parts) • Factory programmed on custom request • Voltage, current, ratiometric or CAN bus output • Double version in the same shell (CAN bus version only) for systems that require redundant signals • Hardware and software filters to remove vibrations and interferences • Inputs/outputs protected against polarity reversal, over voltages and short • circuits • Housed in a tough and compact shell made of glass fiber reinforced Nylon 6 • Electrical connection with M12x1 connectors On request: • Working range configurable • Temperature compensation • Vertical installation (factory set) Typical fields of application: mounted cranes, mobile cranes, aerial platforms, industrial automation and generic mobile machines. Technical data Power supply Device supply current (and max output load for 4 to 20 mA version) for single and double channel version CD Product image for illustration purposes only Intervention range (2) For compensated devices, zero point: ±0.002 degree/°C. For compensated devices, gain: ±0.001 degree/°C (3) Excluding Pulse 5 (ISO 7637) BPE Srl, Campagnola Emilia (RE), Italy | Tel.: +39 0522 662357 | Fax: +39 0522 653740 | Web:

Digital inclinometer Ordering Code SP MkII S 20/20 9 M35 NNN_ Transducer Channels Axes angle Output Electrical CAN Mechanical Thermal type range type connection termination fitting compensation | 2 | 0 | / | 2 | 0 | | Maximum angle equal to 20/20 degrees Electrical connections Axes angle range Output type Current output: 4 to 20 mA Ratiometric output: 10% to 90% Vin. Vin=+5 Vdc CAN output: CAN bus(77 if double) Voltage output: 0.5^4.5 VDc- Vin=9^33 Vdc_ Electrical connection CAN termination Mechanical fitting Thermal compensation I Electrical wiring harness code...