*mydirectindustry

Catalogs
Brevini Power Transmission
series 587/190/390 Super short designs

series 587/190/390 Super short designs

Product catalog summary

Overview: This document is a technical data sheet for the Spicer Gelenkwellenbau GmbH driveshaft series 587/190/390, focusing on super short designs with length compensation. It provides detailed specifications and measurements for various shaft sizes within the series.

Specifications:

Functional Limit Torque (TCS): The torque capacity varies across shaft sizes, with values ranging from 33 kNm to 130 kNm.
Reversing Fatigue Torque (TDW): Values range from 11 kNm to 53 kNm, indicating the shaft's endurance under reversing loads.
Bearing Capacity Factor (Lc): This factor varies significantly, with values such as 1.84 and 510, indicating different load-bearing capabilities.
Maximum Deflection Angle (b): Consistently set at 5° for all shaft sizes.

Design and Dimensions:

Shaft Sizes: The document lists five shaft sizes: 587.50, 190.55, 390.60, 190.65, and 390.70.
Dimensions: Key dimensions such as A, K, B, C, F, G, H, I, M, and W are provided in millimeters, with specific tolerances noted.
Flange Design: All designs feature a 10-hole flange with specific diameter measurements.

Performance Metrics:

Shortest Compressed Length (Lz): Ranges from 415 mm to 688 mm.
Length Compensation (La): Values are either 40 mm or 80 mm, depending on the shaft size.
Weight (G): The weight of the shafts ranges from 60 kg to 252 kg.
Moment of Inertia (Jm): Values range from 0.33 kgm² to 3.455 kgm², indicating the rotational inertia of the shafts.

Conclusion: The data sheet provides comprehensive technical specifications for the driveshaft series, essential for engineers and designers in selecting the appropriate shaft for specific applications. The document emphasizes the importance of understanding torque capacities, dimensions, and performance metrics to ensure optimal functionality and reliability.

Catalog excerpts

series 587/190/390 Super short designs-1

Data sheet series 587/190/390 Super short designs 9.06 driveshaft with length compensation, super short design Shaft size TCS = Functional limit torque* Yield torque 30% over TCS TDW = Reversing fatigue torque* L c = Bearing capacity factor* 26 © Spicer Gelenkwellenbau GmbH * See specifications of driveshafts. b = Maximum deflection angle per joint 1) Effective spigot depth 2) N

Open the catalog to page 1

series 587/190/390 Super short designs-2

Open the catalog to page 2

All Brevini Power Transmission catalogs and technical brochures

Archived catalogs

E series_2019
272 Pages
E Series
5 Pages
CATALOGUE E series
274 Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list