0.01 with length compensation, tubular design 0.02 with large length compensation, tubular design 0.03 without length compensation, tubular design 9.01 with length compensation, short design 9.02 with length compensation, short design 9.03 with length compensation, short design 9.04 without length compensation, double flange shaft design TCS = Functional limit torque* Yield torque 30% over Tcs Tdw = Reversing fatigue torque* 1) Effective spigot depth Lc = Bearing capacity factor* 2) Number of flange holes p = Maximum deflection angle per joint -i 20 © Spicer Gelenkwellenbau GmbH

Flange connection with face key0.03 9.01 9.02 9.03 0H10-hole flange 0H16-hole flange Lf Each driveshaft size has a specific hole pattern (see table). Other hole patterns available on request. C = Torsional stiffness of shaft without tube Cr = Torsional stiffness per 1.000 mm tube * Larger length compensation available on request L-z min = Shortest possible compressed length La = Length compensation Lf min = Shortest fixed length Lz + La = Maximum operating length Gr = Weight per 1.000 mm tube Jm = Moment of inertia JmR = Moment of inertia per 1.000 mm tube © Spicer Gelenkwellenbau GmbH