HYDRAULIC POWER PACK HYDRAULIKAGGREGAT Technical Catalogue December

MC2 modular powerpacks are compact electro-hydraulic power units.The high quality of the components and their flexibility and ease of mount makes these powerpacks compact in size and competetively priced. For specialist manufacturers and hydraulic distributors units can be supplied in kit form.The standard design ensures a large choice of pumps ranging from 0,25 to 9,8 CC/revolutions of tanks from 1-25 L.and motors ranging for 0,35 - 3 kW DC and 0,12 4 kWAC. MC2 powerpacks are mainly used to control the movement of single acting cylinders in various applications e.g.fork lift trucks,air platforms,scissors...

SOLENOID VALVES ELEKTROMAGNETVENTILE A 1/4" PARALLEL OPENED 1/4" ZWISCHENPLATTE PILOT CHECK VALVE ON "B" PORT PILOT CHECK VALVE ON "A" AND "B" PORTS P ADJUSTABLE PRESSURE ON "A" PORT E 3/8" PARALLEL OPENED 3/8" ZWISCHENPLATTE R ADJUSTABLE PRESSURE ON "B" PORT MIT DBV IN "B" S ADJUSTABLE PRESSURE ON "A" AND "B" PORTS MIT DBV IN "A" UND "B" HAND PUMP MIT HANDPUMPE L PILOT CHECK VALVE ON "A" PORT MIT ENTSPERRBAREM RV IN "A" HIGHTENING PLATE h=29 NECESSARY FOR AC MOTOR M-N-P HEBEPLATTE h=29 NOTWENDIG FUER EL-MOTOREN -M-N-P MOUNTING SEQUENCE ANORDNUNG MANIFOLD BLOCKS FOR CETOP3 SOLENOID VALVES (UNI...

RELIEF VALVES DRUCK BEGRENZUSVENTIL STANDARD EINSTELLUNG WITH PROTECTION CAP MIT SCHUTZKAPPE WITH SEALED CAP MIT SICHERUNGSKAPPE WITH HAND WHEEL MIT HANDRAD PRESSURE RANGE PRESSURE-COMPENSATED FLOW CONTROL VALVES STROMREGELVENTILE MIT DRUCKKOMPENSATION 108 max ADJUSTABLE FLOW (L/MIN) EINSTELLBEREICH (L/MIN) 8 ADJUSTABLE FLOW (L/MIN) EINSTELLBEREICH (L/MIN) 11 FIXED FLOW (L/MIN) EINSTELLWERT (L/MIN) 2

OPTIONS OPTIONEN PUMPS DISPLACEMENT PUMPENGRÖßEN P NOMINAL DISPLACEMENT CC/REV FÖRDERVOLUMEN NOMINAL cm.³/U P (T) BSP G 3/8" without holes for blocks mounting P (T) BSP G 3/8" ohne Bohrungen fuer die Bloeckemontage Mounting foot Befestigungsfuß With M6 holes for blocks mounting Mit Bohrungen M6 fuer die Bloeckemontage PUMP GROUP BAUGRÖßE CONTACT HYDR-APP TO CHECK THE OPERATING DATA KONTAKT HYDR-APP ZUR ÜBERPRÜFUNG DER BETRIEBSDATEN DC - AC MOTORS ELEKTROMOTORE DC/AC DC MOTORS - GLEICHSTROMMOTORE TYPE TYP GA START SWITCH POSITION TERMINAL POSITION WITHOUT START SWITCH POSITION DER POLE OHNE STARTRELAIS...

TANKS BEHÄLTER SPECIAL SIZES ON REQUEST NOMINAL CAPACITY SENKRECHT OHNE BEHÄLTER VERTICAL WITHOUT TANK MOUNTING POSITION MONTAGESCHLÜSSEL

ORDERING CODE BESTELLSCHLÜSSEL Hand wheel Handrad 35-90 bar Pressure range Einstellwert (l./Min.) DC motor mounting position with start switch Fixed flow (l/min.) Nominal capacity (litres) DC motor mounting position without start switch Position der pole ohne Startrelais 9,5 12 15 The validation of the central endhead follows a life-test with 250 bar pulsed pressure repeated for 100.000 cycles Nach Validierung der zentralen Anschlussblöcke folgt eine Belastungsprüfung bei 250 bar mit wiederholten Druckspitzen über 100.000 Lastspiele. AC motor mounting position Adjustable flow (l/min.) Vertical...

Brevini Fluid Power S.p.A. Via Moscova, 6 42124 Reggio Emilia - Italy Tel. +39 0522 270711 Fax +39 0522 270660 www.brevinifluidpower.com [email protected]