FP HYDRAULIC POWER PACK Technical Catalogue January

© 2018 Dana Brevini S.p.A. all rights reserved. Hydr-App, SAM Hydraulik, Aron, Brevini Hydraulics, BPE Electronics, VPS Brevini, OT Oiltechnology, logos are trademarks or are registered trademarks of Dana Brevini S.p.A. or other companies Dana in Italy and other countries. The technical features supplied in this catalogue are non binding and no legal action can be taken against such material. Dana Brevini will not be held responsible for information and specifications which may lead to error or incorrect interpretations. Given the continuous technical research aimed at improved technical features...

^DANA^> Motion Systems The FP series power pack is an easy-to-assemble, compact, electro-hydraulic unit. With its versatility and modularity, it offers many combinations of hydraulic circuits to suit various requirements of plant design. This catalogue has been written to help the user choose the components for the power pack required for the specific application. However, the catalogue cannot foresee all the combinations that may be executed, so in some cases it may be necessary to consult our commercial engineering department. For applications with very complex circuits, standard modular blocks...

Endhead configuration Power pack configuration endhead Flow control valves

Endhead configuration Power pack configuration Flow control valves (or plug for cavity 9) 4FA

Endhead configuration Power pack configuration Flow control valves 4TF

Power pack configuration endhead FPE (for directional control valves) _________ Motion Systems Flow control valves

Power pack sections VIII (J-K-W) With its great modularity, the FP series of power packs can create multiple configurations which satisfy requirements in a wide range of applications. To make it easier to choose components, the power pack is subdivided into sections. SECTION I - SERIE, FLANGE TYPE, VALVES ON CAVITY 1 FP Series Powerpacks are based on the Flange features. The Flange is the core of the unit, on the flange are mounted all the valves, the pump, the motor and the reservoir. The FP Flange is available in several Versions (with different tooling options). The Flange Version must be chosen...

Motion Systems SECTION I - SERIE, ENDHEAD, VALVES ON CAVITY 1

Motion Systems SECTION IV- TANKS /SECTION V - TUBES KIT

Selection code SECTION VII - TRANSMISSION KIT (only for motors on the catalog) Transmission kit Type End section VII Specify the transmission kit whether you requested the joint and accessories assembly (without motor). T ** - SECTION VIII - BLOCKS Blocks Mounting position Accessory Separation line Block type Accessory Pressure relief valve setting on “A” line Pressure relief valve setting on “B” line CETOP valve End section VIII J SECTION IX - ACCESSORIES Accessories (optional) First accessory Second accessory

Peripheral Peripheral Peripheral Peripheral Peripheral (2) Return Return Return Return POWER PACK FIXING SIDE 134 101.6 1) blocks interface 2) available only for FPA - FPC endhead 3) the cavity 5 is not accessible with blocks mounted (section IX). 4 HOLES WITH Ø7 (FOR ATTACHING TANKS) PUMP/TANK SIDE There are three types of cavities: - Peripheral cavities, which can be accessed externally - Return cavities, inside of the tank. - Ports The number of cavities tooled identify the endhead type: Endhead type FPA FPC FPL FPE GROOVE FOR TANK SEALING GASKET (O-RING, 3.53x110.72) 4 HOLES 1/4-20 UNC (112)...

Motion Systems 7 Return 8 Return 9 Return \

Motion Systems Thread ports *

* (...) j Pressure relief valve with check valve * 1 = Supplied assembled. Unassembled, see accessories page 89.

Sect. II - FPA Cavity 2 Cavity Type Features Optional flow control valve (omit if not required) FPA** ** (...) 2 Optional flow control valves

Motion Systems Piloted solenoid valves normally closed, without emergency Piloted solenoid valves normally closed, with emergency

Motion Systems Button operated valves FPA 2 .. ** j +* ! Flow control valves (1)

(1) Flow control valves can be combined with plug TG.

Motion Systems Return cavities Return cavity, omit if not required flow control valves Optional flow control valves FPA Optional flow control valves * j Flow control valves for return cavities"6-7" *

Sect. II - FPA Ports A-B BREVINI Motion Systems Possible combinations plugs on ports Symbols description Possible combinations plugs on ports A-B Combination -00 to use with the standard blocks (page 85)

Motion Systems (...) j Pressure relief valve with check valve * 1 = Supplied assembled. Unassembled, see accessories page 89.

Sect. II - FPC Cavity 2 Cavity Type Features Optional flow control valve (omit if not required) FPC** ** (...) 2 Optional flow control valves

Motion Systems Piloted solenoid valves normally closed, without emergency

Motion Systems FPC ii Button operated valves

_________ Motion Systems Sect. II - FPC Cavity 3 Cavity Flow control valve can be combined with plug TC Optional flow control valves

Motion Systems Piloted solenoid valves normally closed, with emergency Button operated valves Bidirectional flow control valves not compensated Unidirectional flow control valves compensated Pressure relief valves

Motion Systems One-way check valves (1) I The flow control valves can be installed with the plug TC

Sect. II - FPC Cavity 4 Cavity Type Features FPC** ** (...) 2

Motion Systems Piloted solenoid valves normally closed, without emergency

Motion Systems Lever operated valve

Motion Systems 5 T G j +* j Flow control valves (1) * (1) I The flow control valves can be installed with the plug TG

6 * j Flow control valves for return cavities "6-7-8-9" * * Plugs for return cavity "9" *

Motion Systems Possible combinations plugs on ports A-B-C Symbols description Combination -00 to use with the standard blocks (page 85)

Sect. I - FPL Cavity 1 BREVINI Motion Systems (...) j Pressure relief valve with check valve * 1 = Supplied assembled. Unassembled, see accessories page 89. Check valve and plug *