*mydirectindustry

Catalogs
Brevini Power Transmission
Articulated boom lift equipment

Articulated boom lift equipment

Product catalog summary

Overview: The document provides a comprehensive overview of hydraulic components and systems designed for articulating boom lifts, offered by Brevini Fluid Power. It highlights the integration of reliable hydraulic components with gearboxes and electronic controls to ensure precise management and safety compliance.

CTD Wheel Drive: This component offers a maximum output torque of 5500 Nm with a ratio range of 13.8 to 53. It features a compact design integrating motor and gearbox, with emergency disengagement and a parking brake.

SDU Slewing Drive: Capable of delivering up to 6000 Nm of torque, with a ratio range of 5 to 36.5. It includes an oil level dipstick for maintenance and an integrated brake.

OT Gear Pump: Offers a displacement range from 0.70 to 90 cc and operates up to 5000 rpm with a maximum pressure of 300 bar. It is noted for its mechanical and volumetric efficiency, suitable for heavy-duty applications.

Proportional Integrated Circuit: Supports up to 35 LPM and 320 Bar, with on/off and proportional control. It features a compact design with zinc protection and customizable ports.

CSOL100-080 Double Acting Lifting Cylinder: Features a bore range of 80 to 280 mm, rod range of 50 to 240 mm, and stroke up to 4000 mm, with a maximum continuous pressure of 550 bar. It is designed for smooth motion and high quality.

IDXYMP MKII Levelling Device: Offers 2/4 semi-axes on/off levelling with a tilt range of -20/+20°. It is factory set or user configurable, easy to install, and meets safety standards Cat. 3 (EN 954-1) and PL d (EN 13849-1).

Levelling Integrated Circuit: Provides 1 to 12 LPM flow, with a compact design and progressive control, integrating hydraulic and electronic packages.

CSTE 060-040 Double Acting Cylinder: Features a bore range of 80 to 200 mm, rod range of 50 to 150 mm, and stroke up to 500 mm, with a maximum continuous pressure of 350 bar. It is maintenance-free with a floating head.

IDXYMP MKII and IDXYMP-ID3 MKII Tilt Devices: These devices offer 2/4 semi-axes with a tilt range of -20/+20°, CAN connection, and are easy to install, meeting safety standards.

LAB3 Levelling Electronic Board: Includes an integrated planarity sensor with push buttons and software calibration, featuring system auto-calibration and adaptive control.

TT, TC, and PIN Load Cells: Provide differential output with custom sizes and special finishes available on request.

TAC MK II Angle Transducer: Offers outputs of 0.5-4.5VDC/1.0-9.0VDC and 4-20 mA or CAN, with a range of 0 to 360°, factory set or user configurable.

Conclusion: Brevini Fluid Power offers a one-stop solution for articulating boom lifts, combining hydraulic components with electronic controls to meet high safety standards.

Catalog excerpts

ARTICULATING BOOM LIFT

Open the catalog to page 1

ARTICULATING BOOM LIFT Thanks to the great experience in the ﬁeld of powered access platforms Brevini Fluid Power is able to offer dedicated packages suitable for a wide range of lifting equipment. Reliable hydraulic components come together with gearboxes in a complete solution with electronic controls that assure accurate management of core functions of the machine in compliance with the highest safety requirements. • Max output torque 5500 Nm • Ratio range 13,8 ÷ 53 PROPORTIONAL INTEGRATED CIRCUIT • Integrated planarity sensor • Push buttons + software calibration System auto calibration,...

Open the catalog to page 2

All Brevini Power Transmission catalogs and technical brochures

Archived catalogs

E series_2019
272 Pages
E Series
5 Pages
CATALOGUE E series
274 Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list