Catalogs >
Breton SpA | Advanced technologies and materials >
Breton PARAGON FLEX leaflet

Breton PARAGON FLEX leaflet
6Pages

Catalog excerpts

paragon flex Multiwire machine to saw blocks into thin gauge slabs Multi diamond wire machine to cut 12, 20 or 30 mm thick slabs. The structural robustness combined with the characteristic triangle system makes it possible to saw marble and granite blocks to make slabs of various thicknesses, even thin ones.

Open the catalog to page 1

4 1. Tension wheels 2. Upper guide wheels 3. Drive wheel 4. Independent and motorised lower guide wheels 5. Idle wheels set

Open the catalog to page 2

Breton Paragon Flex Paragon Flex was designed to minimise vibration during the cutting phase and guarantee the maximum precision in positioning the wires in order to minimise the wastage of material. The system with 7 rotary units is composed of tension wheels, 4 guide wheels (2 low and 2 high), the drive wheel and the idle wheels set. The high performance of the machine has tangible results in terms of production, wire lifetime, and maintenance of cutting positions. Also, with the “adjustable guide wheels”, also with small blocks, you can always use the machine in the best conditions in...

Open the catalog to page 3

5 reasons to choose Breton Paragon Flex: Various thickness slabs: 12, 20 and 30 mm. Paragon Flex makes it possible to saw slabs of different thicknesses, from the ever more popular 12 mm up to the more classic 20 or 30 mm sizes. Isosceles triangle geometry to extend wires lifetime. The structure with 7 rotating units makes it possible to limit wire length to 20 m, thus guaranteeing lower levels of vibration of the wires during the cut with consequent improved sawing quality and longer lifetime of the rubber profiles. Load-bearing structure optimised to cancel vibrations. The wheels and...

Open the catalog to page 4

Technical information Max. dimensions of the block (length) Max. dimensions of the block (height) Obtainable slab thickness for 20 mm sawing (new wire) Obtainable slab thickness for 30 mm sawing (new wire) Max. number of wires for sawing 20 mm thickness Max. number of wires for sawing 30 mm thickness Diameter of the diamond wire (new wire) Diameter of the diamond wire (worn out wire) Wire-driving groove pitch Weight Overall Length dimensions Width Height - starting to cut - finishing to cut

Open the catalog to page 5

Founded in 1963 by Marcello Toncelli, with headquarters in Treviso (Castello di Godego), two other production sites in Italy and seven foreign branches (USA, Australia, Germany, India, China, UK, Brazil), the company is recognized worldwide thanks to its philosophy always aimed at research. The Breton Institute of Technology, expression of Breton’s DNA and pioneering attitude, is the department where new technologies are explored and created. Several teams devoted to research design and develop new sustainable materials and technologies for different industrial sectors. All contents are for...

Open the catalog to page 6