Catalogs >
Breton SpA | Advanced technologies and materials >
Breton GENYA SWITCH leaflet

Breton GENYA SWITCH leaflet
6Pages

Catalog excerpts

The advanced 5-axis monoblock cnc machining center with by-pass feeding, for cutting, profiling and drilling slabs in marble, granite, engineered stone, Lapitec and ceramic.

Open the catalog to page 1

Breton Genya Switch is the advanced 5-axis monoblock cnc machining center with by-pass feeding, ideal for cutting, profiling, drilling and finishing slabs. This machining center combines all the advantages of Genya cutting performance with an automatic platform exchange system that allows to considerably reduce downtimes and to have a single operator following the working phases. In this way, while the spindle is working, the operator can proceed with all the loading, acquisition and programming operations for the next slab cutting. The worktop exchanger allows increasing productivity, up...

Open the catalog to page 2

Digital one-shot photo capture system 3 tools always on board at the same time: cutter, saw and drill bit By-pass feeding that optimizes loading and unloading phases LabelPro (optional), the automatic labelling printer on the spindle Hot-dip galvanized structures to guarantee long-life

Open the catalog to page 3

5 reasons to choose Genya Switch: Increasing productivity rate up to 90% than a classic stand-alone cutting center, thanks to the by-pass feeding, that optimizes loading and unloading phases. 3 tools always on board at the same time, for cutting and drilling, thanks to Rocket Tool, the additional electrospindle. Easy control despite of power, thanks to rich and extremely easyto-use computer software interface, that enables to drive maximum Numerical Control computing calculation power. Faster cutting thanks to automatic positioning and suction cup gripping system on the spindle. Smart...

Open the catalog to page 4

TECHNICAL DATA Max slab sizes* X-axis (travel | speed) Y-axis (travel | speed) Z-axis (travel | speed) Saw blade Ø Motor spindle Water requirement * thicker slabs up to 180 mm / 7.1 are machinable but directly loaded inside the machine not using the by-pass feeding ** 4.800 mm / 189 in considering the photo capture system

Open the catalog to page 5

Founded in 1963 by Marcello Toncelli, with headquarters in Treviso (Castello di Godego), two other production sites in Italy and six foreign branches (USA, Australia, India, China, UK, Brazil), the company is recognized worldwide thanks to its philosophy always aimed at research. The aspiration to explore new technologies, as an integral part of the company’s DNA, has led to the establishment of the BIT (Breton Institute of Technology), where the various dedicated teams design and test innovative solutions to develop materials that anticipate the industry needs. All contents are for...

Open the catalog to page 6