BRECO Flat belts
13Pages

BRECO®-, BRECOFLEX® flat belts THE POWER OF A WELL-MESHED GROUP. BRECO is member of Mulco Europe EWIV

Keeping things moving! Keeping things moving! Keeping things moving! Innovation is our drive - this principle marks BRECO Antriebstechnik Breher GmbH & Co., manufacturer of BRECO® and BRECOFLEX® timing belts as the most innovative producer in the field of polyurethane timing belt technology worldwide. The basis for a high-quality and reliable product is provided by wear resistant polyurethane for the belt body and high tensile steel cord tension members. The name BRECO became the synonym for polyurethane timing belts resulting from years of experience in the field of thermoplastic...

Table of contents BRECO®-, BRECOFLEX® flat belts Table of contents BRECO®, BRECOFLEX® flat belts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Flat belts with E tension member. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Available materials. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 BRECOFLEX® flat belts Flat belts made of polyurethane F2 . . ....

Available materials Flat belts with E steel cord tension member Materials for the standard application area Application informations: For intended application under extreme conditions please contact our technical department for advise. In the E tension member the tension member crosssection is distributed to a lot more thinner individual wires and, therefore, the bending fatigues are markedly lower in the individual wires. The advantage of the E tension members is a higher flexibility. This is especially important, when smaller mounting dimensions for pulleys and tension rollers are...

BRECOFLEX® F2 BRECO®-, BRECOFLEX® flat belts flat belts (endless) Standard 2 Standard Belt widths b [mm] (in-between belt widths on request) F2 16 25 32 50 75 100 BRECOFLEX® manufacturing process The BRECOFLEX® flat belt is produced in continuous lengths without tension carrier interruptions. The tension carrier is wound in the form of a thread. Continuous flat belts are available in standard lengths and widths as shown in the tables. The BRECOFLEX® manufacturing process enables intermediate lengths up to a maximum continuous length of 20,000 mm to be supplied. Available versions and...

Standard 2 1 Standard F1 F2 Available versions and lengths F1 (M) Open length (M) joined (V) BRECO® F2 BRECO® F1 Open length (M) Standard delivery length (M) Belt widths b [mm] (in-between belt widths on request) rolls of 100 m Cuts / Lengths > 100m Length graduation from groove to groove (in 10 mm stages) 8 10 15 20 - Standard material Standard delivery length (M) TPUST1 25 32 50 75 100 on request Minimum lenght joined (V) 880 Standard material 1) Belt widths b [mm] (in-between belt widths on request) rolls of 50 or 100 m Cuts / Lengths > 100m Length graduation from groove to groove (in 10...

Open length (M) joined (V) Standard Standard 2,5 Standard 2,2 Standard F2.2 F2.5 Available versions and lengths F2.2 (M/V) Standard delivery length (M) Belt widths b [mm] (in-between belt widths on request) rolls of 50 or 100 m Cuts / Lengths > 100m Length graduation from groove to groove (in 10 mm stages) 20 25 30 32 F2.5 (M/V) 40 50 75 Standard delivery length (M) 100 880 Standard material Available versions and lengths TPUST1 50 100 on request Minimum lenght joined (V) 880 Standard material 1) Belt widths b [mm] (in-between belt widths on request) rolls of 50 or 100 m Cuts / Lengths >...

Open length (M) joined (V) Standard Standard 6 Standard 3 Standard F3 F6 Available versions and lengths F3 (M/V) Standard delivery length (M) Belt widths b [mm] (in-between belt widths on request) rolls of 50 or 100 m Cuts / Lengths > 100m Length graduation from groove to groove (in 10 mm stages) 30 50 100 Standard delivery length (M) TPUST1 30 on request Minimum lenght joined (V) 880 Standard material 1) Belt widths b [mm] (further belt widths on request) rolls of 50 or 100 m Cuts / Lengths > 100m Length graduation from groove to groove (in 10 mm stages) 880 Standard material Available...

Information of BRECO® and BRECOFLEX® flat belts Flat belts fastening elements Technical Type 1 F1 F2 F2.2 F2.5 F3 amin [mm] b 80 125 45 50 75 20 25 20 20 25 Ø dmin [mm] 16 25 30 30 50 emin [mm] 3 3 4 5 5 Radius Rmin a 60 30 10 12 15 15 25 Thread (min) R 50 25 c [mm] approx. c 40 bmin [mm] M5 M6 M6 M6 M8 Information relating to the storage and use of BRECO® and BRECOFLEX® flat belts (original instructions for use) The flat belts must be stored in a dry, cool and dark environment (max. 60% relative humidity, temperature range +5°C to +35°C). By observing the geometries, loadings and ambient...

EC declaration of conformity Assembly instructions EC declaration of conformity (here as part of the original operating instructions) Assembly instructions for BRECO® and BRECOFLEX® flat belts The flat belts must be fastened at both belt ends in a suitable manner. The recommended flat belt end attachments can be used for fastening. The specified values and instructions must be observed. The flat belts must be guided in a suitable manner on the drive and deflecting pulleys. In the case of cylindrical pulleys, flanged pulleys or, as the case may be, convex pulleys can be used for guiding. In...

Distribution partner Anton Klocke Antriebstechnik GmbH Senner Straße 151 D-33659 Bielefeld phone: +49 521 950 05-01 fax: +49 521 950 05-11 www.klocke-antrieb.de info@klocke-antrieb.de Germany Walter Rothermundt GmbH & Co. KG Am Tannenbaum 2 D-41066 Mönchengladbach phone: +49 216 169 462-0 fax: +49 216 166 446 9 www.rothermundt.de info@rothermundt.de Germany Hilger u. Kern GmbH Antriebstechnik Käfertaler Straße 253 D-68167 Mannheim phone: +49 621 370 5-0 fax: +49 621 370 5-403 www.hilger-kern.com antriebstechnik@hilger-kern.de Germany THE POWER OF A WELL-MESHED GROUP. Distribution partner...