General Specifications:
The document provides detailed specifications for the Eagle 2 Hydraulic Shear models SH25R to SH900R. Key parameters include weight, working pressure range, oil flow requirements, open and close times, cycles per minute, cylinder output, cutting force, maximum opening, jaw depth, and height.

Weight: Ranges from 750 lb (340 kg) for SH25R to 20,723 lb (9,400 kg) for SH900R.

Working Pressure Range: Varies from 2,900-3,626 psi (200-250 bar) for smaller models to 4,641-5,076 psi (320-350 bar) for larger models.

Oil Flow Required: Starts at 16-26 gpm (60-100 lpm) for SH25R and increases to 158-185 gpm (600-700 lpm) for SH900R.

Performance Metrics:
- Open Time: Ranges from 1.80 seconds to 6.33 seconds.
- Close Time: Ranges from 1.87 seconds to 4.27 seconds.
- Cycles per Minute: Varies from 6.2 to 14.3 cycles at maximum oil flow.
- Cylinder Output: From 38 tons to 397 tons.
- Cutting Force: From 66 tons to 707 tons.

Dimensions:
- Maximum Opening: 7.7 inches (195 mm) to 38.0 inches (965 mm).
- Jaw Depth: 7.9 inches (200 mm) to 36.6 inches (930 mm).
- Height: 53.1 inches (1,350 mm) to 181.1 inches (4,600 mm).

Cutting Table: Specifies the capacity for cutting rods, tubes, IPE, HEA, HEB, plates, L profiles, and rails, with varying dimensions and tonnage capacities.

Additional Notes: All dimensions and specifications are approximate and subject to change without notice. Recommended carrier weights for 2nd and 3rd member applications are provided but not detailed in the document.