General Specifications:
The document provides detailed specifications for the Rotating Multi-System (MS) models MS8R, MS20R, MS30R, MS40R, MS60R, and MS130R. Each model is equipped with different jaw sets, including Crusher, Pulverizer, Shear, Combi Cutter, Plate Shear, and Recycling Jaw Sets. The weight of these units varies significantly depending on the jaw set used, with the MS130R being the heaviest.

Working Pressure and Oil Flow:
The working pressure range for these systems is between 4,206-5,076 psi (290-350 bar), with oil flow requirements ranging from 26-212 gpm (100-800 lpm) depending on the model.

Performance Metrics:
Open and close times, cycles per minute, and cylinder output are specified for each model, with the MS130R having the highest cylinder output at 396 tonnes. The force at the outer tip and center of the cutter varies by jaw set and model, with the Shear Jaw Set on the MS130R providing the highest force at 417 tonnes.

Carrier Weight Recommendations:
Recommended carrier weights are provided for both 2nd and 3rd member configurations, with the MS130R requiring the heaviest carriers.

Dimensions:
Maximum opening, jaw depth, and height are detailed for each jaw set and model. The MS130R has the largest dimensions, particularly in the Crusher Jaw Set.

Cutting Table Specifications:
Details are provided for the Shear Jaw Set's cutting capabilities, including rod, tube, IPE, HEA, plate, and L profile dimensions.

All specifications are approximate and subject to change without notice.