Model FP - Full Port: 1 4”- 4” / 3 4”- 212” Model SP - Standard Port: / / Triad Series Flow-Tek’s Triad Series ball valves feature live loaded stem seals and a redundant body seal design. Available in full and standard port models, these rugged, high pressure 3-piece valves are ideal for process, severe service, high temperature, and high cycle applications. Fire Safe - Certified to API 607 4th Edition Triad Series valves have been fire tested and meet or exceed these standards. Secure Mount Triad Series valves offer ease of automation due to an integrally cast actuator mounting pad that complies with ISO 5211 standards through 2” valve sizes. Pressure Ratings Models FP & SP: 2200 psi WOG End Connections Threaded Socket Weld Butt Weld Extended Socket Weld Extended Butt Weld ASME 150/300/600 Flanged Custom Grooved

Body Bolts (A) As standard Triad Series valves feature hex head bolts to join end connections to the tapped valve center section. This design, in lieu of a through bolt design, ensures precise alignment of the end caps – minimizing potential problems such as bolt shrinkage and elongation in severe temperature and thermal cycling applications. Less bolting movement reduces the chance for body seal failure. Ball (B) Flow-Tek balls are precision machined and mirror finished for bubble-tight shut off with less operating torque. Ball edges have machined curvatures to reduce seat wear and provide a...

Dual Body Seals Flow-Tek’s Triad Series valves utilize a dual body seal system to provide added protection against external leakage. The inner primary seal is TFM material. The secondary seal is graphite. Utilizing TFM as the inner seal minimizes the possibility of color contamination of the process media. Both body seals are securely retained in grooves machined into the body. These grooves reduce seal movement and cold flow. Therefore, constant compression is maintained even under extreme conditions. Secure Mount A unique standard feature of the Triad Series is an integrally cast top flange...

Valve Sizes 1/4” through 4” Stainless Steel Carbon Steel Threaded End Connections meet Body Seal Butt Weld End Connections meet Body Seal Body Bolt* Anti-Static Device Flanged End Connections meet Packing Protector Thrust Washer Protector Thrust Washer Stem Packing Packing Gland Sleeve Belleville Washer Travel Stop Set Sleeve Travel Stop Bolt Handle Sleeve Locking Device *All Fine Thread in sizes 1/4” through 2 1/2” † 12 for 2” FP and 2 1/2” SP. • All valves are Fire Safe and certified to API 607 4th Edition. • Valves meet NACE MR0175. • Valve body and end connections are high quality investment...

Pressure Ratings Stainless Steel Carbon Steel Steam Service: Threaded, Socket Weld and Butt Weld: Model FP/SP 2200 psi WOG Flanged: per flange rating, consult factory Tek-Fil Seats Peek Seats Body Seal Body Seal Seat Support Body Bolt* Anti-Static Device UHMWPE seats are not recommended for steam. Packing Protector Vacuum Service: To 29 inches Hg. gauge. Thrust Washer Protector Thrust Washer Pressure / Temperature Stem Bearing Stem Packing Packing Gland Carbon Steel Packing Follower Gland Bolt Carbon Steel Stop Housing Housing Bolt Carbon Steel Travel Stop Carbon Steel, Zinc Plated Carbon Steel...

Full Port Model FP Threaded, Socket, Butt W Extended Butt Weld Extended Socket Weld Torque at maximum rated pressure, clean water, TFM seats. Refer to Technical Bulletin 1005 for complete torque information. Torque Weight lbs-in Nm Weights are based on valves with Threaded End Connections. Standard Port Model SP Threaded, Socket, Butt W Extended Butt Weld Extended Socket Weld NOTE 2: 2 1/2” 3” & 4” valves feature , a NAMUR stem slot for ease of limit switch mounting.

SECURE MOUNT Model FP Size ins mm G Butt Weld End Schedule 80 Extended Socket Weld End SECURE MOUNT Model SP Extended Butt Weld End Schedule 80 Extended end connections allow for welding the valve in the piping system without valve disassembly.

Ordering Information Item 3 Piece Valve Body Design Standard Bore Port Full Bore Port Stainless Steel (A351 Gr CF8M) Carbon Steel (A216 Gr WCB) Threaded (NPT) Socket Weld Extended Socket Weld Butt Weld Extended Butt Weld ASME Flanged CL 600 ¼” - 01, 3/8” = 02, ½” = 03, ¾” = 04 1” = 05, 1¼” = 06, 1 ½” = 07, 2” = 08 2 ½” = 09, 3” = 10, 4” = 11 316 Stainless Steel RPTFE PEEK Tek Fil (Carbon Graphite/TFM) TFM Virgin PTFE Stainless Steel Filled PTFE UHMWPE Stellite - Metal Cavity Fillers (PTFE is Standard) Body Style Body Material End Connection Valve Size Ball and Stem Seat The 3 piece body design...