Catalog excerpts
Omni Series BRANSON Ultrasonic CleaningOMNI 2000 Cleaning Systems - Models 1620 and 1620 RI The OMNI 2000 cleaning system by Branson is a fully-configured ultrasonic cleaning and rinsing system with a built-in dryer. Also available, as an option, is a rust inhibitor station in the second rinse tank. The equipment incorporates quality workmanship and materials without including unnecessary extras. The OMNI 2000 offers a full range of hard-working features, while occupying only a fraction of the floor space of comparable systems. All controls are mounted in a convenient control box and operate at 24 volts for safety. CLEANING Precision cleaning is accomplished in the first chamber. This chamber is equipped with Branson Series 7000 industrial 40 kHz ultrasonic components and thermostatically-controlled heat. A recirculating pump and filter system to continuously remove particulate material is standard. RINSING The OMNI-2000 includes two heated rinse tanks in a cascade arrangement. Rinse water overflows from tank three into tank two. This counter-flowing feature provides excellent rinsing while substantially reducing water consumption. Tank two includes ultrasonic components as standard to assure that all soils and cleaning chemistry are driven from blind holes and crevices before the dry cycle. RUST INHIBITING OPTION As an option, the user may choose to use the second rinse tank as a rust inhibitor dip prior to drying. This model, 1620-RI, is useful when cleaning steel components. The valving associated with this system allows easy conversion from a single overflow rinse back to a dual tank cascade rinse in seconds if your process changes. DRYING The drying station utilizes both elevated temperature and rapid air movement to produce dry parts. The chamber is furnished with a 3" vent duct to facilitate moist air removal. EMERSON.Industrial Automation
Open the catalog to page 1Omni Series Ultrasonic Cleaning FEATURES & BENEFITS • Clean, rinse, and dry in a single unit • Small footprint minimizes floor space needs Working tank size: Process tank material: Drain sizes: • Low voltage controls for safety Cleaning tank temperature: • Standard filtration to extend cleaning bath life Recirculation flow rate: Filter retention: • Ultrasonics on rinse tank for superior Ultrasonic output: Dryer heat: Dryer airflow: Dryer temperature: Input voltage: • Convenient working height • Durable stainless steel construction • Easy access to routine maintenance components • Convenient...
Open the catalog to page 2All Branson Ultrasonics catalogs and technical brochures
-
MWX100 Ultrasonic Welder
2 Pages
-
LPX Platform
6 Pages
-
Branson™ Series 2000X
12 Pages
-
Branson™ GPX Handunit
2 Pages
-
Spin Welder Model SW300
2 Pages
-
Branson™ GPX platform
4 Pages
-
B series
2 Pages
-
Branson’s 8500 Series
2 Pages
-
Branson’s 8300 Series u
2 Pages
-
CPN 955-007
2 Pages
-
M and MH Ultrasonic Baths
2 Pages
-
Bransonic® M and MH
2 Pages
-
Sonifier® S250A
2 Pages
-
Aqueous Ultrasonic Cleaning
2 Pages
-
OMNI 1012 Cleaning System
2 Pages
-
OMNI X TDR-ZP
4 Pages
-
Sonifier® SFX150
4 Pages
-
2032S
2 Pages
-
GVX H/HR Series
6 Pages
-
2000xc
2 Pages
-
Branson B-Series
2 Pages
-
Clean Vibration Technology
6 Pages
-
Ultrasonic Wire Cleaning
4 Pages
-
Cleaning Baskets
2 Pages
-
DHA-1000
2 Pages
-
B-3
2 Pages
-
B-200
2 Pages
-
PC-620
2 Pages
-
IC Series
2 Pages
-
CPXH Series
2 Pages
-
CPX Series
2 Pages
-
MH/M Series
2 Pages
-
Cup Horn
2 Pages
-
Acoustic Sound Enclosure
2 Pages
-
1" High Intensity Cup Horn
2 Pages
-
2 & 3" Cup Horns
2 Pages
-
Microtips
2 Pages
-
Disruptor Horn
2 Pages
-
Flow-Thru Horn
2 Pages
-
DCX F with EtherNet/IP
2 Pages
-
DCX A-F
6 Pages
-
Continuous Flow Attachment
4 Pages
-
Acoustic Enclosure
2 Pages
Archived catalogs
-
Branson Spin Welders
2 Pages