Catalogs >
Brandywine Communications >
RG-2111 Redundant GPS Reference Frequency Generator with Dual NTP ports

RG-2111 Redundant GPS Reference Frequency Generator with Dual NTP ports
2Pages

Catalog excerpts

RG-2111 Redundant GPS Reference Frequency Generator with Dual NTP ports - 1

Features • 1U 19” rack mount • Dual Redundant hot swappable Power Supplies • Dual GPS Disciplined Modules • Dual NTP Output Ports The RG-2111 is a redundant reference frequency generator that uses Global Positioning System (GPS) to steer two internal low phase noise OCXO’s. Each GPS Disciplined Module provides a set of 3 low phase noise 10 MHz sine waves, 1PPS, monitor and control interface to a user interface output panel. If a failure is sensed in one module the unit will switch outputs to the other GPS Disciplined Module to provide continuous service. These outputs are accurate daily to 1 x 10-12 when slaved to an internal GPS tracking receiver’s time. Dual redundant hot swappable power supplies make the RG-2111 perfect for military communications, telecommunications and satcom telecommunications. The RG-2111 is also able to slave to an external 1PPS signal to steer and hold an internal oscillator and clock system precisely in time. The oscillator maintains its high accuracy of time and frequency information even if no satellites can be tracked. The dual network ports support NTP time server functionality. Ethernet ports are available on a full time basis and are not switched in a failure mode. A serial data port is provided to report time, date, position, GPS satellite health and signal strength. 1153 Warner Avenue . Tuslir, CA 92700 - 714-755-1050 Phone - 714-7-55-0175 Fa*. - “Gil Free 077-FOR-SYNC w '.vw. b ra n d yw i n econim. co m i nfo @ b ra n dvw inecomm.com

Open the catalog to page 1

RG-2111 Redundant GPS Reference Frequency Generator with Dual NTP ports - 2

brcindyuiine communication/RG-2111 Specifications 1153 Warner Avenue ■ Tustirr CA 92781 ■ 714-755-1050 Dh;re w '.vw. b ra n d yw i n econim. co m Inputs 2 External 1PPS Reference Signal Input - Module A - 0 to +5 Vdc 50 Ohm, BNC-F - Module B - 0 to +5 Vdc 50 Ohm, BNC-F 2 External GPS Antenna Inputs: - Module A: BNC-F - Module B: BNC-F 2 AC Power PSM IEC320 connectors with on/off switch and fuse Internal Oscillators supported • High stability OCXO (std) Accuracy (std HSOCXO) • Time Accuracy GPS <30ns ■ DCLS time code <1us Network Interface Interface Type 10BaseT HTTP, SNMP v1...

Open the catalog to page 2