PTP8 Slave Network Time Client The PTP8 Network Time Client provides network operators and equipment manufacturers with a packet – based timing and synchronization solution. Features Standalone IEEE1588v2 PTP Client Precision timing circuits ensure stability In event of synchronization signal interruption. Integrated Web Server LED System Status Multiple Outputs and customer specified options Also available Time of day (TOD) is provided for support Of legacy equipment using IRIG B, RS232, RS422 And RS 485. OEM Board design also available providing Equipment Manufacturers with a fast track PTP Implementation. The PTP8 Slave Network Time Client converts the IEEE 1588v2 protocol supplied across a packet network to traditional E1/T1, 1PPS, 10MHz, IRIG B, Serial TOD and customer requested timing signals. The PTP8 Slave Network Time Client profides a rapid upgrade of existing network infrastructure to packet based timing and synchronization enabling operators to lower upgrade costs when migrating from a TDM to Ethernet backhaul. Typical Applications Include: Telecommunications - LTE - Ethernet/ IP Backhaul (Syncrhonization of Base Stations) WiMAX Broadcasting (Synchronization of DVB/ DAB Transmitters) Power Utilities (Applications requiring Time of Day) Applications requiring Precise Timing delivered over a Packet Network System Benefits: Seamless Upgrade to PTP IEEE 1588v2 Complete End to End PTP Solution with PTP80 Grandmaster Clock Accelerates PTP Client Deployments Time Outputs (1PPS, TOD) Unicast/ Multicast Operations Correlation of 10MHz and 1PPS

Specifications Module Connections The unit provides two standard RJ45 connections to a 100BASE-T network one for configuration, firmware uploads and providing NTP (Network Time Protocol) and the other for PTP connection to the master or Grandmaster PTP clock. A 9 way D type socket is also available for RS232 connection for configuration, status and firmware upload purposes (115.2kbaud, no parity, 8 bit characters and 1 stop bit). 1PPS and 10MHz outputs are provided via two BNC 50O sockets. E1 or T1 output via 75O BNC socket PHYSICAL GENERAL and Internal oscillator: OCXO H 34mm W 170mm D 142mm...