Catalogs >
Brandywine Communications >
OSA-5320 Stand-Alone IEEE 1588 v2 PTP Slave Clock Using Precision Time Protocol (PTP)

OSA-5320 Stand-Alone IEEE 1588 v2 PTP Slave Clock Using Precision Time Protocol (PTP)
2Pages

Catalog excerpts

OSA-5320 Stand-Alone IEEE 1588 v2 PTP Slave Clock Using Precision Time Protocol (PTP) - 1

OSA 5320 IEEE-1588/ PTP Slave Clock The OSA 5320 is a stand-alone PTP slave clock using the Precision Time Protocol (PTP) also known as IEEE 1588 v2 Powerful network delay analysis delivers full time alignment over hostile networks (including Layer 2 and Layer 3 routing). Manual or automatic best master clock selection No need to install GPS antennas 2.048 Mbit/s, 2.048 MHz and 1.544 Mbit/s synchronization clock signal for legacy equipment Multicast & Unicast operation ideal for use in Telecoms environment The Precision Time Protocol (PTP) is a solution for the distribution of synchronization over IPbased packet networks such as IP, IP/MPLS, Ethernet, IP/xPON and IP/xDSL networks. PTP is also known by the name of the corresponding standard IEEE 1588-2008. Brandywine offers a comprehensive range of PTP products covering all synchronization needs in the telecommunication domain. The OSA 5320 PTP Slave is designed to operate with PTP grandmaster clocks from Brandywine or from other vendors. The OSA 5320 consists of a PTP protocol engine which connects to one or several distant PTP Grandmaster clocks over an IP or Ethernet network. The PTP Slave is a high performance synchronization clock solution delivering frequency, phase and time-of-day over a set of output ports featuring a variety of output formats using Precision Time Protocol (PTP) over an Ethernet network. Applications Typical applications are the synchronization of 2G, 3G, cdma2000 and WiMax base stations, of xPON optical line terminals of DAB, DVB, and DTV transmitters, etc. PTP allows the distribution of accurate frequency, phase and time-of-day to these applications even in cases where the transport network is asynchronous. 1153 Warner Ave. ● Tustin, CA 92780 ● 714-755-1050 phone ● 714-755-0175 fax www.brandywinecomm.com

Open the catalog to page 1

OSA-5320 Stand-Alone IEEE 1588 v2 PTP Slave Clock Using Precision Time Protocol (PTP) - 2

brandywine communication/ Technical Specifications Three Brandywine 5320 PTP Slave Solutions Three versions of the OSA 5320 PTP are available: • Telecommunication (synchronization of BTS/NodeB/RNC) • Broadcasting (synchronization of DVB/DAB transmitters) • Power utilities (applications requiring time-of-day) Synchronization Outputs Telecom output, BNC 7 5 12, configurable by software; 10 MHz sinewave, BMC 50 II, ±10 ns phase aligned to IPP£ • IRIG-B DCLS; IEEE 1344, 2.5 Vpp +/- 0.1 Vpp, BNC 50 n NMEA 0183; GPRMC message format, RS-232 via RJ-45 Protocol: IEEE 1588-2008 (Version 2) User...

Open the catalog to page 2