Catalog excerpts
Network Time Displays Features Digital Clock Automaticall=y Synchronizes with NTP servers over Ethernet Network 0.5”, 3.2” or 5” display sizes Remote network management Time Zone and Daylight Savings support Multiple colors Optional Network Time Server version with built-in GPS receiver Optional built-in IRIG B time code reader Brandywine’s family of Network Time Displays provides maintenance free display of time. They receive their time over a standard computer network, by interrogating a network time server. The Network Time Displays use the Internet standard for time transmission, Network Time Protocol (NTP) to synchronize themselves automatically to a network time server. Using existing standard network cabling and makes installation of the Network Time Displays simple and straightforward. No dedicated wiring is required when using the Ethernet as the synchronizing source. Once connected to the network, the displays can automatically receive a network address using DHCP protocol. Software utilities are provided that will automatically identify any Network Time Displays on the network, to allow configuration from a single PC. Individual displays have the capability of displaying their own address by means of a rear panel push button, which can also be used to set the display brightness. Time can be displayed as either 12 hour or 24 hour time format. A built-in web browser allows the user to control which time source will be used, time zone and daylight savings set-up and display brightness. Full password protection for changing settings is provided on all units. All displays include an RS232/422 broadcast time port, with user specified time message for synchronizing external equipment. All displays may also be
Open the catalog to page 1synchronized from an RS232/422 ASCII serial source or optionally, an analog time code such as IRIG-B. Network Time Displays are available in a variety of configurations, including: A desktop/console mount unit with 0.5” characters A 1U 19” rack mount unit with 0.5” characters A wall/ceiling mounted unit with 3.2” character height A wall/ceiling mounted unit with 5.0” character height suitable for larger public spaces. Network Time Displays are available in either 4 digit (HH:MM) or 6 digit configurations (HH:MM:ss). Specifications Network Protocols NTP SNTP DHCP TCP/IP UDP Module...
Open the catalog to page 2Ordering Information
Open the catalog to page 3All Brandywine Communications catalogs and technical brochures
-
PTP-8080 Boundary Clock
4 Pages
-
Catalog
20 Pages
-
NVA-100
2 Pages
-
HaveQuick Splitter
2 Pages
-
Frequency Reference Unit
2 Pages
-
OSA_8873
2 Pages
-
QFS-106_Rev_A
2 Pages
-
M210g
2 Pages
-
M211
2 Pages
-
ftsu100
2 Pages
-
ptssaasm
2 Pages
-
NVA Family
2 Pages
-
OSA-5548C BITS/ TSG
5 Pages
-
TimeSpy
4 Pages
-
PCI-Express
2 Pages
-
PTP Slave
2 Pages
-
OSA-8607
4 Pages
-
OSA-3230 Cesium Clock
2 Pages
-
GPS-8
2 Pages
-
ENTA
2 Pages
-
PTU
2 Pages
-
Airborne Timecode Processor
2 Pages
-
HPTS
4 Pages
Archived catalogs
-
NFS 220
2 Pages