Catalogs >
Brandywine Communications >
Airborne Timecode Processor

Airborne Timecode Processor
2Pages

Catalog excerpts

brandywine communications Airborne Time Code Processor • Flight Qualified • Support for IEEE-1588 and GPS Havequick II I/O • Input IEEE-1588 and Convert to IRIG A/B • Tested to MIL-STD 810F and 461E CE102 and RE 102 Brandywine’s Airborne Time Code Processor (TCP-AS). This extremely accurate and robust instrument can be synchronized to a variety of external time sources and is a source of IRIG-B, GPS-Have Quick, NTP or IEEE 1588 time code. Key Features A multi-format precision time source in a small form factor with low power consumption. Can operate as a time code format translator: eg IEEE-1588 (PTP) to IRIG-B Time Code Source Time Mark Output Jam-sync Power Power Backup RS-232 Port USB Interface Time Offset Digital I/O GPS Receiver [option] GPS Lock Indicator Galileo Video Insertion [option] Battery [options] IRIG and GPS Have Quick II time code generator NTP Server and IEEE-1588 Master options UTC / GPS Jam-sync to IRIG-B, GPS HQ, GPS receiver 9 to 36 V DC, 1.5 W Internal clock backed up by Super-Cap NMEA message output Configuration using a PC +/-12 hours with 1 second resolution 5 configurable digital input output pins 16 channel internal GPS receiver with external active antenna GPS lock output Galileo capable with firmware upgrade 2 and 4 channel Video Inserter [PAL and NTSC] Video Status Li-Ion Battery Power option Super Capacitor Power option Video In/Out GPS Antenna (rear) Ethernet (rear) Power Indicator Interface/Power GPS Indicator USB IRIG-B Indicator IRIG-B / GPS HQ In IRIG-B Out Brandywine Communications 1153 Warner Ave, Tustin CA 92780 USA Phone: (714) 755-1050 Fax: (714) 755 0175 email: info@brandywinecomm.com http://www.brandywinecomm.com

Open the catalog to page 1

brandywine communications Specifications Time Code Output Connector Time Formats Output Amplitude BNC IRIG-B121…127 3.0 Vp-p (no load) 2.0 Vp-p (into 600 ohms) Ancillary Signals Five Configurable Digital Signals, can be: Output Programmable Pulse 1 Programmable Pulse 2 Programmable Pulse 3 Programmable Pulse 4 One_PPS GPS On Time Mark GPS_Have Quick II GPS Lock IRIG-DC Input Event 1 to Event 4 Debounced switch closure input Logic level input (accuracy +/- 100 ns ) RS-232 NMEA messages (Time/Location) Connector Manufacturer: Glenair Part Number: 801-011-07M7-10SA Mates with: Glenair Part...

Open the catalog to page 2