Catalogs >
BRAND HYDRAULICS >
HP - Hand operated hydraulic pumps

HP - Hand operated hydraulic pumps
4Pages

Catalog excerpts

HAND OPERATED HYDRAULIC PUMPS “HP” HP121 OR HP61 O’RING PORT to eliminate leakage. DELRIN SEAT to seal between tank inlet and piston reservoir. O’RING OUTLET CHECK for zero leakage. O’RING SEAL between tank and casting. STEEL BALL RELEASE VALVE relieves outlet pressure. EVERY HP IS TESTED for outlet check leakage, double or single pump action and relief setting. OPTIONAL HORIZONTAL MOUNTING BRACKETS allows for horizontal handle actuation. Volume Displacement Cast Iron Body HP22SA – 0.20 in3 (3.3 cm3) (When handle is pulled). Buna N O’Rings HP61DA – 0.60 in3 (9.8 cm3) per full cycle. Delrin Inlet Seat HP121DA – 1.20 in3 (19.7 cm3) per full cycle. Stainless Steel Piston Tank sizes 95 in3 (1557 cm3), 80 in3 (1311 cm3), 65 in3 (1065 cm3), and 50 in3. (819 cm3). TL – 2 in. (50.8 mm) tank used with remote reservoir. Pressure rating and (Standard relief setting). HP22SA – 6000 psi, 414 bar (4000 psi, 276 bar). HP61DA – 3000 psi (3000 psi, 207 bar). HP121DA – 2000 psi (2000 psi, 138 bar). Outlet Port Size #6 SAE (9/16-18). Filler Port Size 1/4” NPT.

Open the catalog to page 1

HP – GENERAL INFORMATION The Brand, hand operated hydraulic pump comes in three basic models HP121DA, HP61DA and HP22SA. Each one of these models comes with a relief that can be adjusted manually to suit the customer’s requirements. Brand has also redesigned the outlet check seat for zero leakage. The zero leak seat was created by utilizing an o’ring seal to replace the steel ball seal. The NT (no tank) option does not have a tank, pressure relief and release valve. To use the NT option the customer must connect the inlet of the hand pump to an external reservoir (external reservoir is not...

Open the catalog to page 2

DIMENSIONAL DATA: inches & [millimeters] DIMENSIONS LISTED ARE THE SAME FOR ALL THREE PUMP SERIES (HP61DA SHOWN) FILL PLUG (1/4" NPT) COVER 1/4" NPT RETURN PORT (RP, OPTIONAL) Page H-3

Open the catalog to page 3

DIMENSIONAL DATA CONTINUED: inches & [millimeters] DIMENSIONS LISTED ARE THE SAME FOR ALL THREE PUMP SERIES (HP61DA AND HP121DA SHOWN) MOUNTING BRACKET ADJUSTABLE RELIEF RELEASE VALVE 1/4" NPT RETURN PORT (RP, OPTIONAL)

Open the catalog to page 4

HP - Hand operated hydraulic pumps 4Pages

Catalog excerpts

All BRAND HYDRAULICS catalogs and technical brochures

HP - Hand operated hydraulic pumps
4Pages