Catalogs >
BRAND HYDRAULICS >
4-way directional control, 0-5 gpm (0-19 lpm)

4-way directional control, 0-5 gpm (0-19 lpm)
2Pages

Catalog excerpts

4-way directional control, 0-5 gpm (0-19 lpm) - 1

4 - WAY DIRECTIONAL CONTROL VALVE SMALL AND COMPACT to fit your design requirements. CROSS HOLES IN SPOOL reduce torque required to rotate the spool. PRECISION GROUND IOSSO PLATED SPOOL that assures long life. OPTIONAL # 4 SAE PORTING for a better seal between the body and the fitting. OPTIONAL T4 SPOOL allows customer to send oil from P to T in the neutral position. OPTIONAL THREE-POSITION DETENT to hold the spool in either active position or neutral. • Standard port size 1/4" NPT all. • 15 degrees of rotation before work ports open to pressure or tank. • 30 - Micron filtration recommended. • Durabar Gray Cast Iron Body • IOSSO Plated Steel Spool

Open the catalog to page 1

4-way directional control, 0-5 gpm (0-19 lpm) - 2

HPV4 – GENERAL INFORMATION: The Brand, HPV4 directional control valves are small and compact. The HPV4’s were designed primarily for use with hand pumps and other low flow applications where size weight and appearance are important. Three-position detent (D) holds the spool in neutral or either active position. Closed center (standard) blocks all ports when in neutral. Tandem center (T4) sends oil from P to T when in the neutral position. The T4 spool should not be used for flows of 4 gpm and greater because the pressure drop increases significantly. HPV4 – CREATING MODEL CODES FOR HPV4’S:...

Open the catalog to page 2

4-way directional control, 0-5 gpm (0-19 lpm) 2Pages

Catalog excerpts

All BRAND HYDRAULICS catalogs and technical brochures

4-way directional control, 0-5 gpm (0-19 lpm)
2Pages