36EFC
4Pages

Catalog excerpts

• ADAPTABLE TO AUTOMATED CIRCUITS for four-way directional speed control. • CONTROL AND WIRING HARNESS PACKAGES available to fit customer's application. • OPEN OR CLOSED PACKAGES are available to suit the customer's needs. • PRECISION GROUND HEAT TREATED SPOOLS assure long life. • DIAMOND HONED SPOOL BORE provides consistent spool fit with low leakage. • O'RING PORTS to eliminate leakage. • PILOT CARTRIDGES assures positive force to shift spool. • OPTIONAL HIGH LIFT RELIEF. SPECIFICATIONS: MATERIALS: • Rated for 0-24 gpm (0-911pm) depending • Cast Iron Body on Series 36-38 work sections used. • Buna N O'Rings • Pressure rating 3000 psi (207 bar). • Heat Treated Steel Spools • 10 Micron filtration recommended. • See Series 36-38 literature for more specifications on work sections. • See EFC literature for more specifications

Open the catalog to page 1

36EFC – GENERAL INFORMATION: The Brand, 36EFC provides the functionality of Brand’s Series 36-38 stack valve combined with the precise flow control of our EFC valve. This allows users to proportionally control the input flow to the stack valve in one complete package. For example, a motor’s speed on a winch can be controlled in forward and reverse. The 36EFC may also electrically control the rate at which a cylinder extends or retracts. Please refer to EFC, series 36 and series 38 literature for information on work sections, valve capabilities and work section model codes. WIRING PACKAGES –...

Open the catalog to page 2

36EFC – CREATING A MODEL CODE FOR 36EFC’S CONT… 36EFC MANIFOLD SECTION (USE THIS MANIFOLD FOR BOTH SERIES 36 & 38): 3 6 P G 2 __ E F C CONDITION OF MANIFOLD: C – Closed manifold, 12 SAE tank port (Use with 2P 36EFC) U – Unloaded manifold (Use with 3-port 36EFC) W – Power beyond, 12 SAE tank port (Use with power beyond 36EFC) TIE ROD KIT: 3 6 T R __ - E F C NUMBER OF WORK SECTIONS: 1 – One work section 2 – Two work sections 3 – Three work sections ETC… 36EFC – FLOW AND PRESSURE INFO: Pressure Drop vs. Flow for P to A or B Pressure Drop vs. Flow for A or B to T Flow (lpm) The pressure drop is...

Open the catalog to page 3

DIMENSIONAL DATA: Inches & [millimeters]

Open the catalog to page 4

36EFC 4Pages

Catalog excerpts

All BRAND HYDRAULICS catalogs and technical brochures

36EFC
4Pages