The PowerMon Titrometer is a versatile applicable on-line measuring instrument. It guarantees a permanent optimal water quality by the continuous supervision in the chemical industry, water and waste water treatment, in power stations and the paper industry. Apart from higher precision and shortening of the measuring cycles the PowerMon offers a special highlight: For the measurement of most diverse parameters (e.g. oxygen, pH, redox, conductivity etc.) the connection of various sensors is possible! For the individual sensors the PowerMon automatically takes over the functions of a transducer. It is also possible to set the separate results against each other. A remote supervision enables the permanent control of the correct function of your plant. The highest possible data transfer over the interfaces, as well as the operation of the PowerMon via the touch screen user interface ensures an precise results easy and user friendly operation. connection of external physical sensors and actuators fully automatic operation easy, comfortable operation fast data transfer water hardness in drinking water, cooling water and treated water self-monitoring system remote maintenance and network ability Chlorine in drinking water, cooling water and conditioned water graphic user interface with interactivex Touch Screen operation m-value, p-value in cooling water and conditioned water update of the operating software or download of data by USB stick minimum operating cost by small reagent consumption second measuring point without surcharge operation also possible without housing

PowerMon Titrometer Technical Data MEASURING METHODS cyclic, volumetric MEASURING CYCLE typ. 5-12 min. MEASURING RANGE m- and p-value 0-0,1 to 0-100 mmol/l Hardness 0 - 0,025 to 0 - 50 mmol/l Chloride 0 - 10 to 0 - 100 mg/l Further parameters and measuring ranges on request. PRECISION 3% or better The compact and modular design of the PowerMon can contain up to six on-line measuring points in one device and enables a space-saving and economic operation DRIFT typ. <0.5% MBE REAGENT SUPPLY min. 3 weeks Number of measuring points max. 6 OUTPUT SIGNAL 0/4-20 mA max. load 500 OHM characteristic curve:...