1. Catalogs
  2. Bran+Luebbe
  3. PowerMon Natriometer - BL-164

PowerMon Natriometer - BL-164

PowerMon Natriometer - BL-164

PowerMon Natriometer - BL-164

Product catalog summary
Overview
The PowerMon Natriometer is an advanced online measuring instrument designed to ensure optimal water quality by continuously monitoring sodium content in ultra-pure water or during water treatments. It supports various sensor connections for measuring parameters like oxygen, pH, redox, and conductivity.

Key Features
  • High precision and reduced measuring cycles.
  • Automatic transducer functions for individual sensors.
  • Remote supervision for continuous plant monitoring.
  • User-friendly operation via a touch screen interface.
  • Fast data transfer and remote maintenance capabilities.
  • Graphic user interface with interactive touch screen operation.
  • Software updates and data downloads via USB.
  • Low operating costs due to minimal reagent consumption.
  • Second measuring point available without additional cost.
  • Operation possible without housing.

Applications
  • Sodium monitoring in boiler feed water.
  • Sodium monitoring in ultra-pure water.

Technical Specifications
  • Measuring Method: Potentiometric.
  • Measuring Cycle: At least 6 minutes.
  • Measuring Range: Na+ 0-0.001 to 0-1.000 mg/l.
  • Precision: Typically less than 5% of the measuring range.
  • Drift: Typically less than 1% of the measuring range.
  • Reagent Supply: Lasts approximately 8 weeks.
  • Number of Measuring Points: Maximum of 6.
  • Output Signal: 0/4-20 mA, max load 500 OHM, galvanically isolated.
  • Interfaces: USB/Ethernet, optional modem (analog, GSM, ISDN, UMTS), Profi bus DP, Modbus RTU.
  • Relay Contacts: 4/12 potential-free contacts.
  • Digital Inputs: 4/12 for system control.
  • Sample Requirements: Pressure-free, temperature 15-45°C, flow 3-10 l/h, free from suspended matter and oil.
  • Power Supply: 85-264 VAC at 47-63 Hz.
  • Power Consumption: Approximately 42 VA (max 90 VA).
  • Environmental Temperature: 15-35°C.
  • Installation: Wall-mounted.
  • Protection Class: IP 65 (electronics), IP 54 (with housing), IP 21 (with jacket).
  • Weight: 53-60 kg without reagents.
  • Dimensions: Housing 700x600x320 mm, with reagent cabinet 1100x600x354 mm.

Additional Information
SPX reserves the right to make design and material changes without notice. For product availability and more information, contact your local sales representative or visit the SPX website.
See more

Catalog excerpts

PowerMon Natriometer - BL-164-1

The PowerMon Natriometer is a versatile applicable on-line measuring instrument. It guarantees a permanent optimal water quality by the continuous supervision of the sodium content in ultra pure water or during water treatments. Apart from higher precision and shortening of the measuring cycles the PowerMon offers a special highlight: For the measurement of most diverse parameters (e.g. oxygen, pH, redox, conductivity etc.) the connection of various sensors is possible! For the individual sensors the PowerMon automatically takes over the functions of the transducers. It is also possible to set the separate results against each other. A remote supervision enables the permanent control of the correct function of your plant. The highest possible data transfer over the interfaces, as well as the operation of the PowerMon via the touch screen user interface ensures an easy and user friendly operation. Advantages • precise results • connection of external physical sensors and actuators • fully automatic operation • Sodium in boiler feed water • easy, comfortable operation • Sodium in ultra pure water • fast data transfer • self-monitoring system • remote maintenance and network ability • graphic user interface with interactive Touch Screen operation • update of the operating software or download of data by USB stick • minimum operating cost by small reagent consumption • second measuring point without surcharge • operation also possible without housing

 Open the catalog to page 1
PowerMon Natriometer - BL-164-2

PowerMon Natriometer Technical Data MEASURING METHODS Potentriometric MEASURING CYCLE at least 6 min. Measuring range in mg/l Na+ 0-0.001 to 0-1.000 mg/l PRECISION typ. <5% of measuring range (end of value) SAMPLE pressure-free Temperature : 15 - 45°C (288 - 308 K) Flow : 3 – 10 l/h free from suspended matter and oil Connection : tube, exible (ID 1.5 - 3 mm) DRIFT typ. <1% of measuring range (end of value) The compact and modular design of the PowerMon can contain up to six on-line measuring points in one device and enables a space-saving and economic operation DRAIN pressure-free tube, exible...

 Open the catalog to page 2

All Bran+Luebbe catalogs and technical brochures

  1. NOVADOS H4

    2  Pages

  2. NOVADOS H1

    2  Pages

  3. ISIS II

    2  Pages

  4. PowerMon S

    2  Pages

  5. PowerMon

    4  Pages

  6. CeraClean

    2  Pages

  7. Oxygen Sensor

    2  Pages

  8. pH Sensor

    2  Pages

  9. NOVADOS BS

    2  Pages

  10. Novados CS

    2  Pages

  11. Novados C

    2  Pages

  12. Novados J

    2  Pages

  13. ProCam Smart

    6  Pages

  14. NOVADOS KK

    2  Pages

  15. NOVADOS H1

    2  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.