The PowerMon Ionometer is a versatile applicable on-line measuring instrument, which is used for the monitoring of the legally prescribed limit value in the outlet of municipal and industrial purication plants. Apart from higher precision and shortening of the measuring cycles the PowerMon offers a special highlight: For the measurement of most diverse parameters (e.g. oxygen, pH, redox, conductivity etc.) the connection of various sensors is possible! For the individual sensors the PowerMon automatically takes over the functions of a transducer. It is also possible to set the separate results against each other. A remote supervision enables the permanent control of the correct function of your plant. The highest possible data transfer over the interfaces, as well as the operation of the PowerMon via the touch screen user interface ensures an easy and user friendly operation. precise results connection of external physical sensors and actuators fully automatic operation easy, comfortable operation Ammonium in waste water fast data transfer Chloride in surface water self-monitoring system Fluoride in beverage industry remote maintenance and network ability graphic user interface with interactive Touch Screen operation update of the operating software or download of data by USB stick minimum operating cost by small reagent consumption second measuring point without surcharge operation also possible without housing

PowerMon Ionometer Technical Data MEASURING METHODS potentiometric MEASURING CYCLE at least 6 min. MEASURING RANGE NO3- 0 - 1 to 0 - 500 mg N/l 0 - 1 to 0 - 1.000 mg/l FCl 0 - 0,1 to 0 - 10.000 mg/l NH4+ 0 - 2,5 to 0 - 1.000 mg/l K+ 0 - 1 to 0 - 10.000 mg/l SAMPLE pressure-free Temperature : 15 - 45°C (288 - 308 K) Flow : 3 – 10 l/h free from suspended matter and oil Connection : tube, exible (ID 1.5 - 3 mm) Further parameters and measuring ranges on request. DRAIN pressure-free tube, exible (ID 10 mm) PRECISION typ. < 5% of measuring range (end of value) DRIFT typ. <1% of measuring range (end...