Sample preparation system for on-line Monitors Separation of particles, colloids and high-molecular substances A sample stream of 2 - 4 m3/h is pumped through the CeraClean. The filtrate passes the special filter tube and is pumped to the analyzer. Blockages are minimised by a special cross flow filter, and automatic back-flushing extends the filter life to several weeks between cleaning. CeraClean is specially designed for low energy consumption and low maintenance costs, which are provided by the automatic cleaning and a small feed pump. Municipal and industrial waste water treatment plants CeraClean advantages compared to other filters: Degreasing baths Automatic washing installations Landfill seepage water CeraClean removes solids, colloids and high molecular weight interfering substances from dirty samples. The filtrate is lead in the analyzer for continuous monitoring. Low dead volume gives rapid response time Robust construction for long life Resistant to strong chemicals Long cleaning intervals Small installation size Supplied premounted for easy installation

Technical Data Filtrate flow rate Solids seperation Ambient temperature Standard filter tube removes solids, colloids and compounds larger than 0.4 µm) Other filter types available (approx. 80 µm for TN/TP) Sample temperature Power requirements Filter Life Cycle Sample flow rate Chemical resistance pH 1 - 13 Sample pressure Chemical interval 2 - 8 weeks, depending on sample contamination Sample feed Rinsing feed Waste For further information please contact our technical support SPX Flow Technology Norderstedt GmbH - Werkstraße 4 - D-22844 Norderstedt Phone: +49 40 52202-0 Fax: +49 40 52202-444...