brain boxes Ethernet to Digital In/Out ED-588 ETHERNET TO Digital 10 8 Inputs + 8 Outputs • 8 Digital Inputs and 8 Digital Outputs • Drives high current and high voltage loads - Ideal for inductive, capacitive & resistive loads • Factory floor process control and automation • Supports Modbus TCP protocol remote monitoring Integral DIN rail mount Easy wire: removable, colour coded terminal blocks NuDAM/ADAM Module Ethernet port Connect, Configur

Fluid level

ED-588 Ethernet 8 DI + 8 DO Specification Input Channels Low Logic Level High Logic Level NPN/PNP Input counting Input latching Debouncing Output Channels Output Type Maximum output current Maximum output load Voltage Protection 8 non-isolated input channels 0V to +1.0V +2.0V to +30V One jumper configures all inputs with either pull-up for NPN (contact closes to 0V) type sensors, or pull-down for PNP (close to V+) type sensors User programmable – counts positive or negative transitions Up to 250Hz count rate 16-bit (65335 count) or 32-bit (4.2 billion count) counters Counter values persist over...

ED-588 Ethernet 8 DI + 8 DO Operating Temperature Storage Temperature Ambient Relative Humidity Monitor CPU temperature via the web interface or programmatically using ASCII commands. Redundant dual power input allows a second power supply to be fitted as a back-up to prevent down time should one power source fail. Can use a 5 Volt power from any computer USB port via optional accessory cable PW-650 - Useful for configuring the device from a laptop in the field. Power Consumption Power Supply input Isolation 2.5 Watt Max Unregulated +5VDC to +30VDC, reverse polarity protection 1500 VRMS Magnetic...

ED-588 Ethernet 8 DI + 8 DO Familiar ASCII Command Protocol: When not using Modbus the ED range of devices can use the de facto industry standard ASCII command protocol implemented in the popular ADAM/NuDAM/EDAM modules. Examples include: $01M !01ED-588 $01F !012.54 @01 >1A45 $012 !01400500 COM Port on Windows Industry Standard Packages Software Platforms Devices Supported Configuration Options read the name of device address 01 device 01 replies that its name is ED-588 read firmware version number of device address 01 firmware version of device 01 is 2.54 read digital input output status of...

Watchdog If the firmware does not refresh the watchdog timer within a predetermined hardware timer interval then all outputs go to a user programmable watchdog hardware good Q-Stop function When a user programmable input transitions to a preconfigured high or low state then all outputs go to a user programmable Q-Stop known good state Industry C-Tick, AEO (C-TPAT), WEEE, RoHS Microsoft Microsoft Certified Gold Partner Approvals & Windows 10 32 bit & 64 bit Editions Signed Drivers Windows 8 32 bit & 64 bit Editions Windows Server 2008 32 bit & 64 bit Editions Windows Server 2008 & Windows 2000...

Optional Accessories PW-650: USB connector fits any standard USB port, such as on a laptop or desktop PC, providing 5V power to a prewired screw terminal block useful for when you are configuring your ED device PW-600: Power supply with connectors for UK, USA, EU and AUS mains socket. ‘Tails’ are suitable for connecting to screw terminal blocks [email protected] www.brainboxes.c