ED-549
8Pages

Ethernet to Analogue In ED-549 ED-549 ETHERNET TO ANALOGUE 8 INPUTS • Ideal for all kinds of industry standard sensors and transducers • 8 Analogue Inputs + RS485 Gateway • High-precision measurements of voltages and currents • Great for process control applications • -30oC to +80oC Temperature range • +5V to +30V DC Input Power Supply Key Specifications • 8 analogue inputs, independently configurable as differential voltage inputs or current inputs • Voltage input ranges: ±10V, ±5V, ±2.5V, ±1V, ±500mV, ±250mV, ±150mV or ±75mV • Current input ranges: ±20mA, 0-20mA or 4-20mA • Built-in current sense resistors for current measurement • Analogue inputs are isolated from the power, network and RS-485 ports • 16 bit resolution • Measurement accuracy: • 0.1% of full-scale range at 25°C • 0.3% of full-scale range over -30 to +80°C • Measurement rate: 12 measurements per second, divided between all enabled inputs • Input impedance (voltage mode) > 10MΩ • Low Noise: CMRR > 120dB • Rejects Mains Hum: NMRR > 100

• "brain boxes

ED-549 Ethernet 8 Analogue In Analogue Inputs 0-3 RS485 Gateway for NuDAM/ADAM Modules Ethernet port Easy to use Interface: Great features for remote monitoring Integral DIN rail mount Analogue Inputs 4-7 +5V to +30V Power Supply Ethernet to IO Device Server: The Ethernet to IO device is implemented using a Windows COM port driver that is completely compatible with all popular PC packages such as LabView, MATLAB and Agilent VEE and support a range of popular APIs. Continue to get value from your existing development and process control system. Slim Shape: Small footprint for when DIN rail...

ED-549 Ethernet 8 Analogue In Grounding: Correctly wired grounds help cut down on electromagnetic interference 5 pin terminals allow a ground on the 5th pin of each block Functional earth connection to the DIN rail Gateway RS485 Serial Port: Half duplex RS485 port allows connection and control of industry standard NuDAM, eDAM and ADAM modules using ASCII protocols. Wide Range Redundant Dual Power Input: +5VDC to +30VDC accommodates variation in the +24VDC factory floor supply and allows alternative power sources. A second power supply can be fitted as a back-up to prevent down time should...

ED-549 Ethernet 8 Analogue In Familiar ASCII Command Protocol: The ED range of devices uses the de facto industry standard ASCII command protocol implemented in the popular ADAM/NuDAM/EDAM modules. Typical examples include: $01M !01ED-549 $01F !013.50 #010 >+04.987 $0150F !01 Read the name of the device address 01 Device with address 01 replies that its name is ED-549 Read firmware version number of device address 01 Device with address 01 replies with the firmware version 3.50 Reads the analogue input of channel 0 from device address 01 Analogue input data from the channel specified Enable...

ED-549 Ethernet 8 Analogue In Browser Interface Webserver Interface Configure IP address, monitor state of i/o lines Programming Interface No device driver needed, just open a TCP connection and send simple ASCII commands. Software drivers give local COM Port interface for configuration Utility Programs Find device, configure IP address Ethernet Ethernet Port 1 x RJ45 jack, 10/100Mhz autosensing, crossover auto sensing (Auto MDIX) 1,500Volts magnetic isolation between I/O ports and network Network Protocols ICMP, IP, TCP, DHCP, HTTP IP-20 rated non-conducting polyamide case with integrated...

• "brain boxes Screw Terminals 3.5mm pitch, #22 - #14, 0.5mm2-2.5mm2 pin power supply Wire Thickness 0.150 inch, 3.81mm, 20 pins, 12+8 screw terminals, #26 - #16 AWG, 0.14mm2-1.3mm2 Power Supply Power Consumption Power Supply input unregulated +5Vto +30Volts DC, reverse polarity protection 1500VRMS Magnetic isolation from Ethernet Operating Temperature Storage Temperature Ambient Relative Humidity Flashing Yellow Flashing between Red & Green Flashing Green/Red Flashing between Green & Red/Yellow Flashing between Green & Yellow Flashing Green Flashing Green Flashing Green Device Ready...

Packaging Information Packaging Installation CD including manual, Microsoft signed drivers & utilities, Quick Start Guide Packaged Weight Packaged Dims GTIN Universal Code Product Support Warranty Lifetime - online registration required Lifetime Web, Email and Phone Support from fully qualified, friendly staff who work in and alongside the Product Development Team Additional Information OEM option Manufactured in the UK by Brainboxes Winner 2005 European Electronics Industry Awards ‘Manufacturer of the Year’ Brainboxes operate a ‘Perfect Fit Custom Design’ policy for volume users. More...