Catalogs >
Brainboxes >
ED-516

ED-516
6Pages

Catalog excerpts

brain boxes ED-516 ETHERNET TO Digital 10 16 Inputs • Monitor any input from TTL to high voltage high current industrial devices • 0 to 30 Volt inputs ideal for dry/Volt free contacts or wet contacts • Supports Modbus TCP protocol remote monitoring Integral DIN rail mount Easy wire: removable, colour coded terminal blocks NuDAM/ADAM Module Ethernet port Connect, Configure, Control brain boxes

Open the catalog to page 1

• "brain boxes Power from laptop ASCII software commands - LabView, Chiller safety Dry/Volt free Contact Example

Open the catalog to page 2

ED-516 Ethernet 16 DI Specification Input Channels Low Logic Level High Logic Level NPN/PNP Input counting Input latching Debouncing 16 non-isolated input channels 0V to +1.0V +2.0V to +30V One jumper configures all inputs with either pull-up for NPN (contact closes to 0V) type sensors, or pull-down for PNP (close to V+) type sensors User programmable – counts positive or negative transitions Up to 250Hz count rate 16-bit (65335 count) or 32-bit (4.2 billion count) counters Counter values persist over power-off periods Triggered by user programmable positive or negative edges, stays true...

Open the catalog to page 3

1500 VRMS Magnetic isolation from Ethernet Ethernet Port 1 x RJ45 jack, 10/100Mhz autosensing, crossover auto sensing (Auto MDIX) 1,500 Volts magnetic isolation between I/O ports and network ICMP, IP, TCP, DHCP, Telnet, HTTP Ethernet 10BaseT / 100BaseTX Protection Network Protocols Connection to Network Webserver Interface Programming Interface Configure IP address, monitor state of I/O lines, set the Watchdog Timers Output Reset Value, Set Power on digital output value No device driver needed, just open a TCP connection and send simple ASCII or Modbus commands. Software drivers give local...

Open the catalog to page 4

ED-516 Ethernet 16 DI COM Port on Windows Industry Standard Packages Software Platforms Devices Supported Configuration Options On a PC running the Microsoft Windows family of OS’s the ED Boost.IO Manager provides a standard COM port interface so enabling thousands of proven legacy applications to work straight out of the box. The COM port based driver means that ED-xxx devices are completely compatible with all popular packages such as: LabView, MATLAB, Agilent VEE. APIs and sample program code for: Microsoft .NET, C#, Visual Basic, C++, JavaScript, PHP, Java, Objective-C The ED sample...

Open the catalog to page 5

• "brain boxes Packaging Installation CD (with manual, Microsoft signed drivers & utilities), Quick Start Packaged Dims 235(1) x 170(w) x 62(h) mm, 9.25(1) x 6.69(w) x 2.44(h) inches Optional Accessories PW-600: Power supply with AUS mains socket. 'Tails' are suitable for connecting to screw terminal blocks standard USB port, such as on a laptop or desktop PC, providing 5V power to a prewired screw terminal block useful for when you are configuring your ED device

Open the catalog to page 6