ED-204
4Pages

{{requestButtons}}

Catalog excerpts

ED-204 - 1

4 Port selectable DIO + RS232 + Switch Ethernet to Digital + RS232 +Switch • 4 Digital Ports Independently can be In or Out • 1 RS232 Serial Port • 2 Port Ethernet Switch for ‘daisy-chaining’ • User friendly software interface Simple web based configuration, monitoring and control • Cost effective all in one solution Digital Channels - 4 Ports individually selectable as Inputs or Outputs Inputs NPN/PNP Logic Level 0: Latched Inputs: Triggered by user programmable positive or negative edges, stays true until acknowledged Counter Inputs: User programmable- counts positive or negative transitions 0-65335 Maximum output current Sinks up to 1 Amp per pin, 40V max load Max combined load 4.0 Amps per ED device individually jumper selectable pull up for NPN, active low, type sensors and pull down for PNP, active high, type sensors Open drain output, protected MosFET intelligent short circuit protection up to 36V Over temperature shutdown :1750C typical 1500C min Maximum output load Voltage 40V ESD Protection 4 Individually Selectable Digital In or Out Puts sales@brainboxes.com Tel: 0151 220 2500 Toll Free USA: +1 (88

Open the catalog to page 1
ED-204 - 2

ED-204 4 Port selectable DIO + RS232 + Switch Complete Ethernet to Serial Device Server: One RS232 serial port up to 1 MegaBaud, delivers uncompromising performance. Software drivers give Windows users a local COM port allowing you to retain your existing software applications and connect to your devices over the network. Web configuration and RFC2217 compliant interface for non-Windows users. Serial Port Tunnelling allows serial cable replacement over any distance, no software required. Ethernet to DIO Device Server: The Ethernet to DIO device is implemented using a Windows COM port driver...

Open the catalog to page 2
ED-204 - 3

ED-204 4 Port selectable DIO + RS232 + Switch Software Development COM Port on Windows On a PC running the Microsoft Windows family of OS’s the ED Boost.IO Manager provides a standard COM port interface so enabling thousands of proven legacy applications to work straight out of the box. COM port compatibility allows you to continue to get value from your existing application software investment. Moreover your engineers don’t need to retrain to use the Brainboxes ED range of I/O devices. Industry Standard Packages The COM port based driver means that ED-xxx devices are completely compatible...

Open the catalog to page 3
ED-204 - 4

ED-204 4 Port selectable DIO + RS232 + Switch Housing and connectors IP-30 rated non-conducting polyamide case DIO Terminal 10 way x 0.2inch/5.08mm pitch removable screw terminal block Power Terminal 3 way x 0.2inch/5.08mm removable screw terminal block Power Supply Power Consumption Operating Temperature Power Supply input unregulated +5V to +30Volts DC, reverse polarity protection Storage Temperature 1500VRMS Magnetic isolation from Ethernet Ambient Relative Humidity Device Ready Flashing Yellow Changing Settings Flashing between Red & Green Flashing Green/Red User performing Hard Reset...

Open the catalog to page 4

All Brainboxes catalogs and technical brochures

  1. ED-560

    6 Pages

  2. ES-246

    4 Pages

  3. ED-038

    4 Pages

  4. ED-008

    4 Pages

  5. ED-004

    4 Pages

  6. CC-869

    4 Pages

  7. CC-530

    2 Pages

  8. CC-525

    2 Pages

  9. CC-072

    2 Pages

  10. BL-875

    2 Pages

  11. ED-549

    8 Pages

  12. ED-538

    6 Pages

  13. ED-527

    6 Pages

  14. ED-516

    6 Pages

  15. ED-588

    7 Pages

  16. BL-830

    2 Pages

  17. BL-819

    2 Pages

  18. ES-257

    4 Pages

  19. VX-012

    2 Pages

  20. UC-607

    2 Pages

  21. ES-701

    4 Pages

  22. US-257

    4 Pages

Archived catalogs

  1. BL-875

    2 Pages

  2. PX-101

    28 Pages

  3. PM-010

    47 Pages