Tunnel demagnetizer type DT REF 16.04 {ERREUR : balise [PRESTATION_CRITERE_ASOUST] inconnue} Rugged construction / Waterproof construction Demagnetization . Coil sealed in a high performance epoxy (black) . Reinforced system . Tapped mounting holes . ON/OFF switch with pilot lamp . Thermic protection . 3 meters of cable It is necessary that the workpiece be moved through the alternative field at a slow and constant speed (recommended 0,2 m/sec.). At the end of the operation, the part must be moved away as far as possible from the unit (40 to 60 cm), in order to avoid incomplete demagnetization. Options Paint Other voltage Decreasing frequency machine to demagnetize hard pieces Automatic and semi-automatic systems (for bearings,...) Reference