PLATE DEMAGNETIZER TYPE DM3,DM4,DM5 REF 16.01 {ERREUR : balise [PRESTATION_CRITERE_ASOUST] inconnue} Rugged construction Demagnetization . Coil incorporated in an aluminium box . Magnetic system that will automatically adjust the magnetic field strength to the geometry of each component (max thickness 50 mm) . ON/OFF switch . 1.5 meters of cable It is necessary that the workpiece be moved through the alternative field at a slow and constant speed (recommended 0,05-0,2 m/sec.). At the end of the operation, the part must be moved away as far as possible from the unit (20 cm), in order to avoid incomplete demagnetization.