DATA SHEET DIAGNOSTIC SYSTEMS PULL-OUT BOVIAR TESTING EQUIPMENT

DIAGNOSTIC SYSTEMS PULL-OUT BOVIAR TESTING EQUIPMENT PULL-OUT BOVIAR TESTING EQUIPMENT WHAT DOES IT DO Equipment for estimating the in-place strength of concrete by pull-out testing method. The only equipment currently available in the market totally designed and manufactured in full compliance with the technical specifications prescribed in UNI EN 12504-3:2005 standard. “Testing concrete in structures - Part 3: Determination of pull-out force”. Instrumentation is composed by: • Hallow hydraulic cylinder 100 kN capacity, fitted with a steel bearing ring with a 55 mm inside diameter, a 70 mm outside...

DIAGNOSTIC SYSTEMS PULL-OUT BOVIAR TESTING EQUIPMENT • Drilling bit Drilling bit made in caboloy (ø 18 mm) with adaptor for percussion drill with bayonet fitting. • Electric die grinder (450W, 25000 rpm) long nose with rubber grip complete with a ø 18 mm diamond cutter (stem ø 10 mm) and a spanner. • Extraction stem Steel extract Sstem for Thoro® rawplug. • Thoro® rawplug Post-installed rawplug (consumable accessories) with a geometrically-controlled mechanical expansion as requested by the standardizied testing procedure. The geometric features of these special inserts (both disc diameter and...

DIAGNOSTIC SYSTEMS PULL-OUT BOVIAR TESTING EQUIPMENT “CE” certificate of the all system and not of the single component (jacket, pump, e tubing). Certificate of calibration issued by Polytechnic University of Marche. The calibration refers to: Load system used to determine the extracting force of pre-embedded inserts or post-embedded in concrete and according to UNI EN 12504-3, the system consists of: • Hydraulic jack; Hydraulic pump; Digital pressure gauge; Hydraulic tubings. Specifications and standards subject to change without notice Check the site updates for the cards, projects, and other...