■ Non-contacting combination sensor ■ Electric power steering systems ■ Provides a differential angle for calculating ■ Electronic stability control, advanced front the steering torque within the ECU ■ Operating temperature: -40 °C to +125 °C lighting, park assist, navigation and lane departure warning Torque and Angle Combo Sensor General Function This non-contacting combination sensor is used in vehicles featuring electrically-controlled power-assisted steering which requires steering angle information. The torque sensor measures the rotational deection of a torsion bar that interconnects the input and output shafts of the steering column. The torsion bar deects in proportion to the amount of steering effort from the driver. The output signal from the torque sensor is fed into the steering ECU which controls the amount of steering assistance provided by an electrical motor. A higher torque corresponds to a higher level of assistance. The steering angle portion measures the direction, speed and angular position of the steering wheel. This information can be used by other various vehicle systems such as electronic stability control, advanced front lighting, park assist, navigation and lane departure warning. Traditional combination sensors used a clockspring to deliver power and transfer the signal; this new sensor eliminates the requirement for a clockspring. Please note that this document refers to general product specications which are subject to change. General Specications Torque Specications Europe: Bourns Sensors GmbH Robert-Bosch-Str. 14 D-82054 Sauerlach Phone: +49 (0) 8104 646-0 * Application Specic For improved or different specications, contact Bourns engineering. The Americas: Bourns, Inc. 1660 N. Opdyke Road, Ste. 200 Auburn Hills, MI 48326-2655 USA Phone: +1 248 926-4088 www.bourns.com [email protected] REV. 02/12 Specications are subject to change without notice. Customers should verify actual device performance in their specic applications. Asia: Bourns, Inc. 10F, No. 146, Sung Jiang Road Taipei, Taiwan, 104 PRC Phone: +886 2 2562-4117