*mydirectindustry

Catalogs
BOURNS
Inductive Component Solutions Guide

Inductive Component Solutions Guide

1 / 212 PagesView full catalog

Inductive Component Solutions Guide

Product catalog summary

Surface Mount Chip Inductors

Product Capability Matrix: Overview of models, construction technology, and lab kit sizes.
Product Specifications: Details for CM, CW, CE, CV, CS, CI, and CF series, including dimensions, inductance, and frequency ranges.
Lab Kit Offering: Lists lab kits with size, inductance range, and quantity per kit.
Soldering Profile: Recommended soldering temperature and time.

Surface Mount Power Inductors

Product Capability Matrix: Details on power inductors.
Product Specifications: Specifications for SDR, SRR, and SRU series, focusing on shielding and power handling.

Surface Mount Chip Beads

Product Capability Matrix: Overview of high current and high impedance chip beads.
Product Specifications: Details on MH, MG, MU, MZ, MT, and MA series, emphasizing current and impedance.

Through-Hole Inductors

Product Capability Matrix: Summary of radial and axial inductors.
Product Specifications: Specifications for RLB, FSR1013, PT121, LPA, and LPV series, focusing on construction and application suitability.

Surface Mount Data Line Dual Chokes

Product Capability Matrix: Overview of dual chokes for data line applications.
Product Specifications: Details on DR221, DR331, DR332, and SM-73818E series, highlighting dual choke capabilities.

General Specifications

Temperature and Material: Operating and storage temperature ranges, core materials, and coil types specified.
Applications: Suitable for mobile phones, CTV, VCR, and other electronic devices.

Packaging Specifications Detailed packaging specifications for SMT Chip Inductors, including dimensions and quantities per reel.

Soldering Guidelines Outlines soldering procedures for flow, infrared, and vapor-phase soldering.

Chip Inductors Specifications Detailed specifications for various series, including inductance, tolerance, Q factor, test frequency, SRF, RDC, and IDC.

General Specifications Operating temperature range, storage temperature, and resistance to soldering heat specified.

Applications Suitable for mobile phones, cellular phones, and other electronic devices.

Additional Notes Specifications subject to change; customers advised to verify device performance.

Overview: Specifications for high Q chip inductors, including CW252016, CW201212, CW160808, CE201210, CV201210, and CS321613.

Specifications:

Inductance and Tolerance: Inductance values range from 1.5 nH to 33 µH with tolerances typically at ±5% or ±10%.
Q Factor: High Q values up to 85.
Test Frequencies: Varying test frequencies specified.
SRF (Self-Resonant Frequency): Minimum SRF values provided.
DCR (DC Resistance): Values range from 0.04 ohms to 1.90 ohms.
Current Ratings: Maximum current ratings range from 25 mA to 700 mA.

General Specifications:

Temperature Range: Operating temperatures typically range from -40°C to +125°C.
Soldering Heat Resistance: Components withstand reflow soldering temperatures up to 260°C.
Materials: Core materials include alumina and ferrite.

Packaging and Layout:

Packaging: Components available in reels, with quantities ranging from 2,000 to 4,000 pieces per reel.
Recommended Layout: Detailed dimensions and layout recommendations provided.

Compliance and Standards:

RoHS Compliance: All components comply with the RoHS Directive 2002/95/EC.
Specifications Subject to Change: Customers advised to verify device performance.

Overview: Specifications for ferrite multi-layer chip inductors, including CS321613, CS201212, CS160808, and CI201210.

Specifications:

CS321613 Series: Features include 1206 size, magnetic shielding, high Q characteristics, and nickel barrier.
CS201212 Series: Similar features to CS321613 but in an 0805 size.
CS160808 Series: Features include 0603 size and high frequency capabilities.
CI201210 Series: Available in E12 series, designed for high-frequency applications.

Electrical Characteristics: Detailed electrical specifications for each series.

Applications: Used to prevent electromagnetic interference in various electronic devices.

Packaging: Components packaged in reels, with quantities varying by series.

Diagrams and Graphs: Includes graphs illustrating DC bias characteristics, inductance characteristics, Q characteristics, impedance characteristics, and temperature characteristics.

Overview: Specifications for Bourns multi-layer chip inductors and surface mount power inductors.

Inductance Characteristics: Outlines inductance characteristics across different frequencies.

Electrical Specifications: Lists detailed specifications for CI100505, CF252016, CF322513, and CF453215 series.

Packaging Specifications: Specific packaging details for each series.

General Specifications: Operating and storage temperature ranges, temperature rise limits, and soldering conditions specified.

Applications: Suitable for mobile phones, automotive electronics, and EMI prevention.

Compliance: All products comply with the RoHS Directive 2002/95/EC.

Product Capability Matrix and Selection Guides: Includes a product capability matrix and selection guides for power inductors.

Overview: Specifications and selection guides for shielded and non-shielded power inductors.

Key Sections:

Shielded Series Power Inductors: Lists different models of shielded power inductors.
Surface Mount Power Inductors Capability Matrix: Comparison of various models based on construction, size, and current range.
Current Irms and DCR, Lead Free Power Inductors: Details current ratings and DC resistance for non-shielded power inductors.
SRR Series Shielded Power Inductors Selection Guide: Provides specifications for shielded inductors.

Critical Information:

Specifications: Specifications subject to change without notice.
Inductance and Current Range: Each model associated with specific inductance and current range.
Construction and Size: Physical dimensions and construction type critical for suitability.

Overview: Specifications for SMD power inductors, including SDR0403, SDR0503, SDR0602, SDR0805, and SDR0906.

Key Features:

Available in E12 series.
Low profile and compact design.
RoHS compliant.

Applications:

Input/output of DC/DC converters.
Power supplies for portable communication equipment, camcorders, LCD TVs, car radios, and CD players.

Electrical Specifications:

Test Frequency: 1 KHz.
Test Voltage: 1 V.
Reflow Soldering: 230 °C for 50 seconds max.
Operating Temperature: -40 °C to +125 °C.
Resistance to Soldering Heat: 260 °C for 5 seconds.

General Specifications:

Core Material: Ferrite DR.
Wire: Enameled copper wire.
Terminal: Ag/Ni/Sn.
Rated Current: Inductance drop 10% typical at Isat.
Temperature Rise: 40 °C max at rated Irms.

Packaging:

SDR0403: 2000 pcs per reel.
SDR0503: 500 pcs per reel.
SDR0805: 1000 pcs per reel.
SDR0906: 600 pcs per reel.

Product Dimensions:

SDR0403: 4.5 mm x 3.2 mm.
SDR0503: 5.0 mm x 3.0 mm.
SDR0805: 7.8 mm diameter.
SDR0906: 14.7 mm x 10.3 mm.

Inductance and Current Ratings:

Inductance values range from 1.5 µH to 10000 µH.
Current ratings vary, with some models supporting up to 1.5 A.

Important Notes:

Specifications subject to change without notice.
Customers should verify actual device performance.

Overview: Specifications and guidelines for SMD Power Inductors, focusing on features, applications, and electrical specifications.

Specifications: Outlines dimensions, electrical characteristics, and material composition of different inductor series.

Procedures: Specifies reflow soldering conditions and recommended layout for mounting.

Standards and Compliance: All products are RoHS compliant.

Recommendations: Users advised to verify actual device performance.

Packaging and Marking: Includes detailed packaging specifications and typical part marking.

Overview: Specifications for SMD Power Inductors, including SDR1105, SDR1305, SDR1307, SDR1806, and SDR2207.

General Specifications:

Test Voltage: Typically ranges from 0.1 V to 1 V.
Reflow Soldering: Maximum temperature of 230 °C for up to 50 seconds.
Operating and Storage Temperature: -40 °C to +125 °C.
Resistance to Soldering Heat: 260 °C for 5 to 10 seconds.
Materials: Core made of Ferrite DR, wire is enamelled copper.
Rated Current: Inductance drop typically at 10% to 25% at Isat.
Temperature Rise: Maximum of 40 °C at rated Irms.

Series Specifications:

SDR1105 Series: Inductance values range from 10 µH to 200 µH with current ratings up to 8.0 A.
SDR1305 Series: Inductance values range from 2.5 µH to 1000 µH with current ratings up to 7.2 A.
SDR1307 Series: Inductance values range from 1.5 µH to 1000 µH with current ratings up to 20.0 A.
SDR1806 Series: Inductance values range from 1 µH to 1000 µH with current ratings up to 30.0 A.
SDR2207 Series: Inductance values range from 0.8 µH to 1000 µH with current ratings up to 35.0 A.

Applications: Suitable for input/output of DC/DC converters and power supplies.

Compliance: All series are RoHS compliant.

Packaging and Dimensions: Detailed dimensions and packaging specifications provided.

Packaging Specifications: Detailed dimensions for packaging, including embossed carrier and cavity specifications.

Soldering Profile: Includes ramp-up time and maximum temperature specifications.

SDR7030 Series - SMD Power Inductors: Features inductors available in E6 values, suitable for DC/DC converters and power supplies.

General Specifications: Operating temperature ranges and materials used specified.

SRR0603, SRR0604, and SRR0618 Series - Shielded Power Inductors: Offers inductors with low unit heights and high current capabilities.

Materials and Construction: Core material primarily ferrite, with terminals made of Cu/Ni/Sn.

Overview: Specifications for SRR series of shielded power inductors.

General Features:

Available in E6 and E12 series.
Low profile and high current capabilities.
Lead-free and RoHS compliant.

Applications:

Input/output of DC/DC converters.
Power supplies for portable communication equipment, camcorders, LCD TVs, and car radios.

Electrical Specifications:

Test Voltage: 1 V.
Reflow Soldering: 230 °C for 10 seconds max.
Operating and Storage Temperature: -40 °C to +125 °C.
Resistance to Soldering Heat: 230 °C for 10 seconds.

Materials:

Core: Ferrite DR & RI.
Wire: Enameled copper.
Base: LCP E4008.
Terminal: Cu/Ni/Sn.

Packaging: Components packaged in reels, with quantities varying by series.

Series-Specific Details:

SRR0804 Series: Inductance ranges from 5.0 µH to 470 µH.
SRR0805 Series: Similar specifications to SRR0804.
SRR0906 Series: Offers high inductance up to 10 mH.
SRR0908 Series: Provides high inductance up to 15 mH.

Soldering Profile: Includes a soldering profile graph.

Compliance: All series comply with the RoHS Directive 2002/95/EC.

Note: Specifications subject to change without notice.

Overview: Specifications for various series of shielded power inductors.

Specifications: Each series characterized by inductance value, tolerance, test frequency, SRF, RDC, and current ratings.

Procedures: Recommended soldering profiles specified.

Packaging Specifications: Detailed dimensions and packaging information provided.

Key Features: Low profile, high current capacity, and lead-free construction.

Recommendations: Users advised to verify actual device performance.

Overview: Specifications for various series of shielded power inductors.

Specifications:

SRR1206 Series: Inductance values range from 220 µH to 1500 µH.
SRR1208 Series: Offers inductance values from 2.5 µH to 10000 µH.
SRR1240 Series: Inductance values range from 1.5 µH to 100 µH.
SRR1260 Series: Provides inductance values from 1.2 µH to 100 µH.
SRR1305 Series: Features low height and inductance values from 0.9 µH to 2.7 µH.
SRR1806 Series: Offers inductance values from 10 µH to 47 µH.

General Specifications:

Operating Temperature: -40 °C to +125 °C
Storage Temperature: -40 °C to +125 °C
Reflow Soldering: 230 °C, 50 sec. max.
Resistance to Soldering Heat: 260 °C for 5-10 sec.

Packaging: Inductors packaged in reels, with quantities varying by series.

Applications: Used in input/output stages of DC/DC converters and power supplies.

Overview: Specifications for various series of shielded power inductors.

Specifications: Each series characterized by inductance value, tolerance, test frequency, SRF, RDC, and current ratings.

Electrical Specifications: Inductors tested at 100 kHz with varying Q factors and SRF values.

Soldering Profile: Recommended soldering profile includes maximum temperature specifications.

Packaging Specifications: Inductors packaged in reels with specific dimensions and quantities.

Applications: Suitable for portable communication equipment, camcorders, LCD TVs, and car radios.

General Specifications: Operating and storage temperature ranges, resistance to soldering heat, and materials used specified.

Key Features: Available in various standard values, low profiles, and designed to handle specific current ratings.

Overview: Specifications for Shielded SMD Power Inductors.

General Features:

Available in E6 series.
Unit heights vary from 1.1 mm to 2.8 mm.
Current ratings range from 0.86 A to 4.5 A.
Lead-free and RoHS compliant.

Applications:

Input/output of DC/DC converters.
Power supplies for portable communication equipment, camcorders, LCD TVs, and car radios.

Electrical Specifications:

Test Voltage: 0.1 V (1 V for SRU8028 series).
Reflow Soldering: 230 °C for 50 seconds max.
Operating and Storage Temperature: -40 °C to +125 °C.
Resistance to Soldering Heat: 260 °C for 10 seconds.

Materials:

Core: Ferrite DR and RI core.
Wire: Enameled copper.
Base: LCP E4008.
Terminal: Ag/Ni/Sn.

Packaging:

SRU3028: 600 pcs. per reel.
SRU5011: 1500 pcs. per reel.
SRU5016: 1000 pcs. per reel.
SRU5018: 1000 pcs. per reel.
SRU5028: 600 pcs. per reel.
SRU8028: 1500 pcs. per reel.

Key Parameters:

Inductance values range from 1.0 µH to 100.0 µH.
Rated current defined by a typical inductance drop of 35% at Isat.
Temperature rise specified at a maximum of 40 °C at rated Irms.

Important Notes:

Specifications subject to change without notice.
Customers should verify actual device performance.

Overview: Specifications and details for shielded SMD power inductors and high current chip ferrite beads.

SRU8028 and SRU8043 Series - Shielded SMD Power Inductors:

Features: Available in E6 series, unit height of 4.3 mm, current up to 5.4 A.
Applications: Suitable for input/output of DC/DC converters and power supplies.
Electrical Specifications: Test voltage is 1 V, reflow soldering at 230 °C for 50 seconds max.
Materials: Core made of Ferrite DR and RI, wire is enameled copper.
Packaging: 1,000 pcs. per reel for SRU8043 series.

MH Series High Current Chip Ferrite Beads:

Features: High resistance to heat and humidity, resistance to mechanical shock and pressure.
Applications: Used in power supply lines, IC power lines, and signal lines.
General Specifications: Operating temperature from -55 °C to +125 °C.
Materials: Core material is Ferrite, internal conductor is Ag or Ag/Pd.
Electrical Specifications: Detailed impedance and current specifications for various models.

Packaging Specifications:

Reel dimensions and quantities per reel specified.

Note: Specifications subject to change without notice.

Overview: Specifications and features of MG, MU, MZ, and MT series high and low impedance chip ferrite beads.

Features:

High resistance to heat and humidity.
Resistance to mechanical shock and pressure.
Accurate dimensions for automatic surface mounting.
Wide impedance range.

General Specifications:

Operating Temperature: -55 °C to +125 °C.
Storage Temperature: -55 °C to +125 °C.
Reflow Soldering: 230 °C, 50 seconds max.
Resistance to Soldering Heat: 260 °C, 5 seconds.
Rated Current: Based on max. temperature rise of +40 °C.

Materials:

Core Material: Ferrite.
Internal Conductor: Ag or Ag/Pd.
Terminal: Ag/Ni/Sn.

Electrical Specifications: Lists various models with their impedance at 100 MHz, maximum DC resistance (RDC), and maximum current (IDC).

Graphical Data: Includes graphs showing impedance versus frequency.

Dimensions and Land Patterns: Detailed dimensions and recommended land patterns provided.

Compliance: Products comply with the RoHS Directive 2002/95/EC.

Note: Specifications subject to change without notice.

Overview: Specifications and characteristics of various series of inductors and chokes, including LPV and DR series.

General Specifications: Inductors made with enameled copper wire and ferrite cores, RoHS compliant.

LPV Series Radial Power Inductors: Inductance values range from 10µH to 1000µH.

DR Series Surface Mount Data Line Chokes: Designed for EMI suppression in data lines.

Electrical Characteristics: Detailed tables listing inductance, resistance, and current ratings.

Packaging and Soldering: Components packaged in reels, soldering profiles included.

Applications: Used in DC/DC converters, power supplies, and EMI suppression.

Specifications: Operating and storage temperatures for DR332 Series and SM73818AE Dual Inductor specified.

Procedures: Ordering and packaging procedures detailed.

Standards and Compliance: Products comply with the RoHS Directive 2002/95/EC.

Recommendations: SM73818AE recommended for reflow solder processing.

Graphs and Data: Includes graphs illustrating impedance and insertion loss versus frequency.

Packaging: Components supplied in conductive polystyrene tape.

Contact Information: Worldwide sales offices and technical assistance contacts provided.

All BOURNS catalogs and technical brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list