The following models are currently available, but not recommended for new designs: CG0402MLA-14KG CG0603MLA-14KE n Rated for IEC 61000-4-2, level 4 n Withstands multiple ESD strikes n Low capacitance and leakage currents for invisible load protection n Tape and reel packaging ChipGuard® MLA Series Varistor ESD Clamp Protectors The ChipGuard® CG0402MLA and CG0603MLA Series are based on a multilayer metal oxide technology. The MLA family is designed to protect sensitive electronic circuits from the threat of electrostatic discharge ESD. The MLA series is available from 5.5 V to 26 V DC working voltages. The wide operating voltage and temperature range makes this family ideally suited to IC power supplies, signal and control line protection. Electrical Characteristics @ 25 °C (unless otherwise noted) Environmental Characteristics Device Symbol Asia-Pacific: Tel: +886-2 2562-4117 • Email: [email protected] EMEA: Tel: +36 88 520 390 • Email: [email protected] The Americas: Tel: +1-951 781-5500 • Email: [email protected] www.bourns.com *RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/EU June 8, 2011. Specifications are subject to change without notice. The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time. Users should verify actual device performance in their specific applications. CG 0n0n MLA - n.n x x ChipGuard® Product Designator Package Option 0402 = 0402 Package 0603 = 0603 Package Multilayer Series Designator Operating Voltage** 5.5 = 5.5 V 14 = 14 V 18 = 18 V 26 = 26 V Tolerance K = 10 % L = 15 % M = 20 % Tape & Reel Packaging E = 4,000 pcs. per reel (CG0603MLA Series) G = 10,000 pcs. per reel (CG0402MLA Series) Ni barrier terminations are standard on all ChipGuard® part numbers. ** Only models lower than 10 volts require

ChipGuard® MLA Series Varistor ESD Clamp Protectors Voltage-Current Characteristics Voltage (Volts) SOURCE = 8/20 s PULSE, IPEAK Voltage (Volts) SOURCE = 8/20 s PULSE, IPEAK I Current (Amps) Specifications are subject to change without notice. The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time. Users should verify actual device performance in their specific applications.

ChipGuard® MLA Series Varistor ESD Clamp Protectors W Product Dimensions Solder Reflow Recommendations 300 Ambient to Preheating Temperature Time (seconds) This product can be damaged by rapid heating, cooling or localized heating. Heat shocks should be avoided. Preheating and gradual cooling recommended. Excessive solder can damage the device. Print solder thickness of 150 to 200 um recommended. Solder gun tip temperature should be kept below 280 °C and should not touch the device directly. Contact should be less than 3 seconds. A solder gun under 30 watts is recommended. Specifications are...

3312 - 2 mm SMD Trimming ESD Clamp Protectors ChipGuard® MLA Series Varistor Potentiometer Packaging Dimensions 13.0 ± 1.0 (0.52 ± 0.04) NOTES: TAPE MATERIAL IS PAPER. 0.48 ± 0.03 TAPE THICKNESS IS (0.019 ± 0.0012) COVER TAPE ADHESION IS 40 ± 15 GRAMS. REV. N 05/16 Specifications are subject to change without notice. The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time. Users should verify actual device