1. Catalogs
  2. Bottero
  3. RS90/92 - Mechanical stacker

RS90/92 - Mechanical stacker

RS90/92 - Mechanical stacker

RS90/92 - Mechanical stacker

Product catalog summary
Overview: The document describes the mechanical push-bar stacker by REVIMAC S.r.l., designed for transferring glass containers from a cross-conveyor to an annealing lehr belt. The RS Series caters to annealing lehrs ranging from 1,500 to 4,500 mm in width, operating at a maximum speed of 9 cycles per minute.
Standard Technical Features:
  • The equipment is robust and suitable for both right-hand (RH) and left-hand (LH) delivery, accommodating lehr belts up to 4,500 mm wide.
  • It includes a built-in height adjustment system ranging from 950 to 1100 mm.
  • Container loading is facilitated by the side shifting of the push-bar.
  • An electric motor is mounted on a belt tension adjustment slide for quick replacement.
  • The bar lifting device has a 400 mm stroke and is equipped with a pneumatic cylinder suitable for compressed air from 3.5 bar supply lines.
  • The push-bar features a quick change lock-in system and squaring adjustment with remote control.
See more

Catalog excerpts

RS90/92 - Mechanical stacker-1

MECHANICAL PUSH-BAR STACKER Electro-mechanical equipment for the transfer of glass Electrocontainers from cross-conveyor to annealing lehr belt. crossREVIMAC S.r.l. - Via Mario Carraro, 19 - 36075 Montecchio Maggiore (VI) - Italy +39.0444.493494 - Fax +39.0444.492358 E-mail: [email protected] www.revimac.com

 Open the catalog to page 1
RS90/92 - Mechanical stacker-2

The RS Series includes the entire range of mechanical stackers to serve from 1.500 to 4.500 mm. wide annealing lehrs at a maximum speed of 9 cycles per minute. Standard Technical Features Rugged equipment suitable for RH or LH delivery and for lehrs belt up to 4500 mm wide Built–in height adjustment system (950 to 1100 mm) Container loading by side shifting of push–bar Electric motor mounted on belt tension adjustment slide for quick change replacement Bar lifting device with 400 mm stroke equipped with pneumatic cylinder suitable for compressed air from 3.5 bar supply lines Push–bar quick change...

 Open the catalog to page 2

Archived catalogs

  1. Automation

    13  Pages

  2. Servo feeder

    4  Pages

  3. conveyor

    2  Pages

  4. The MAX IS

    4  Pages

  5. SCMU 200

    2  Pages

  6. SCMU 300

    2  Pages

  7. Servo invert

    4  Pages

  8. RC-900

    2  Pages

  9. 353 BCS

    8  Pages

  10. Conveyors

    2  Pages

  11. E-Forehearth

    6  Pages

  12. E-IS Machine

    5  Pages

  13. servo_feeder

    4  Pages

  14. Stirrers

    2  Pages

  15. 352 BCS CLASSIC

    36  Pages

  16. 332 BKM

    8  Pages

  17. PUSH BARS

    4  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.