Glass Technologies High Speed Feeders

Glass Technologies Mechanical Feeders After serving the glass industry for half a century, the mechanical feeder is proving to be a very reliable machine still up to present date.

Mechanical Feeders • Heavy duty high speed 7” stroke plunger linkage • Oil bath, air spring operated shear mechanism • Standard and Deep type spout case • 5” to 12” diameter gear driven revolving tube • Standard or self aligning sleeves Features The improved feeder suits high-speed operation, ensuring smooth running and featuring light weight plunger carrier. The rigid design of casted supporting frame incorporates linear ball bearings for the plunger supporting shaft. Strenghtened plunger guide features lateral guided rollers to ensure minimal back lash during plunger up and down movement. Three...

RTC - Revolving Tube Control RTC is the system to control rotation of the revolving tube sleeve. • Clockwise and counterclockwise rotation • Tube speed adjustable from 0 rpm to 10 rpm. Resolution 2/100 rev. • Power supply: 200÷240 VAC single-phase ±10 % 50/60 Hz • Digital counter for easy speed adjustable • Operating temperature: from -10°C to +55°C • The system may be installed on any kind of existing feeder revolving tube

Asynchronous motor (power: 1.1 KW) Vectorial inverter (power: 1.5 KW) Asynchronous motor (power: 0.55 KW) RTC - Revolving Tube Control Vectorial inverter (power: 0.75 KW)

THD - Tube Height Driver THD is used for the electrical position adjustment of the feeder revolving tube The running mode are: • AUTO: equipment can be interfaced with any of the automatic gob weighting system available on the market • MANUAL: operator adjust the position of the slave by mean of “up” and “down” switches Features The THD system is composed as follows: • • • • Control panel: 1.1 Kw power, supply, immediate stop circuit. A.C. motor gearbox Box for motor cut off and pushbutton to reset the drive status Engage the gearbox Technical Features • Stop circuit • Control of two limits switches...

THD - Tube Height Driver

The images and data in this catalogue are only indicative and never override the contract engagennentof Bottero S.p.A. For photographic reasons the products is often shown connplete with accessories that are not part of the standard eguipnnentof the machine _e immagini riprodotte sul presente catalogo e i dati contenuti hanno puro valore indicative e in nessun caso costituiscono innpegno contrattualeda parte della Bottero S.p.A. Per ragion fotografiche il prodottoe spesso ripreso connpleto di accessor! che non fanno parte del corredc standard della macchina Feeder type Capacity Gob weight range...