Catalogs >
Bottero >
High_Speed_Feeder

High_Speed_Feeder
6Pages

Catalog excerpts

High Speed Feeders

Mechanical Mechanical Feeders Feeders Description After serving the glass industry for half a century, the mechanical feeder is proving to be a very reliable machine still up to present date.

Open the catalog to page 2

RTC RTC tube control Revolving Description RTC is the system to control rotation of the revolving tube sleeve. Features • Clockwise and counterclockwise rotation. • Tube speed adjustable from 0 rpm to 10 rpm. Resolution 2/100 rev • Power supply: 200÷240 VAC single-phase ±10 % 50/60 Hz • Digital counter for easy speed adjustable • Operating temperature: from -10°C to +55°C • The system may be installed on any kind of existing feeder revolving tube Technical Features Feeders Motor Inverter 281 703 715 Asynchronous motor (power: 1.1 KW) Vectorial inverter (power: 1.5 KW) 344 Asynchronous motor...

Open the catalog to page 3

THD THD Tube Height Driver Description THD is used for the electrical position adjustment of the feeder revolving tube The running mode are: • AUTO: equipment can be interfaced with any of the automatic gob weighting system available on the market • MANUAL: operator adjust the position of the slave by mean of “up” and “down” switches Features The THD system is composed as follows: • Control panel: 1.1 Kw power, supply, immediate stop circuit • A.C. motor gearbox • Box for motor cut off and pushbutton to reset the drive status • Engage the gearbox Technical Features • Stop circuit • Control...

Open the catalog to page 4

• • • • • Heavy duty high speed 7” stroke plunger linkage Oil bath, air spring operated shear mechanism Standard and Deep type spout case 5” to 12” diameter gear driven revolving tube Standard or self aligning sleeves Features High speed mechanism The improved feeder suits high-speed operation, ensuring smooth running and featuring light weight plunger carrier. The rigid design of casted supporting frame incorporates linear ball bearings for the plunger supporting shaft. Strenghtened plunger guide features lateral guided rollers to ensure minimal back lash during plunger up and down...

Open the catalog to page 5

eeder type F Capacity Gob weight range 344 HS Standard spout Deep spout (t/day) 0 - 24 15 - 36 SG (grams) 10 – 650 80 – 1800 Dg (grams) 10 – 300 120 – 500 281 HS Standard spout Deep spout (t/day) 5 – 35 18 – 60 SG (grams) 100 – 2000 140 – 2300 Dg (grams) 15 – 400 50 – 700 703 HS Deep spout (t/day) 35 – 90 SG (grams) 180 – 2300 Dg (grams) 100 – 950 715 HS Deep spout (t/day) 60 – 150 SG (grams) 200 - 3000 Dg (grams) 150 – 1200 BOTTERO S.p.a. - 12100 Cuneo - Italy - via Genova 82 Tel. +39 0171 310611 - Fax +39 0171 310757 hollowglass.sales@bottero.com

Open the catalog to page 6