DOSING SYSTEM for Cold-End Treatment End Treatment

Product catalog summary

Dosing System for Cold-End Treatment

Overview: The dosing unit is designed for preparing compounds used in cold-end spraying on glass containers. It ensures precise mixing and delivery of chemical products.

Operating Principle: Water at a specified pressure is directed through a meter into a purge tank. A metering pump then delivers a pre-set amount of chemical product into a static mixer, which is subsequently supplied to the spraying unit. The process is controlled by a PLC-equipped electrical cabinet, allowing for concentration adjustments and alarm management.

Advantages:

Ease of use.
Minimal maintenance requirements.

Safety Devices:

Safety valve to prevent circuit overpressure.

Optional Features:

Reverse osmosis system.

Technical Features:

Single-shop: Inlet water pressure: 2.5-3 bar, Connection in-let: 1/2", Connection out-let: D.10mm, Power supply: 230 Vac - 50 Hz monophase, Tank capacity: 20 lt, Weight: 60kg (90kg with reverse osmosis system).
Multi-shop: Inlet water pressure: 2.5-3 bar, Connection in-let: 3/4", Connection out-let: D.12mm, Power supply: 230 Vac - 50 Hz monophase, Tank capacity: 50 lt, Weight: 100kg (130kg with reverse osmosis system).

Capability: The system can feed from a single production line up to five production lines simultaneously.

Additional Components: The system includes redundancy in the mixing system to ensure reliability.

Catalog excerpts

DOSING SYSTEM for Cold-End Treatment End Treatment-1

DOSING SYSTEM for Cold-End Treatment Dosing Unit designed to prepare the compound for the cold-end spraying on glass coldcontainers REVIMAC S.r.l. - Via Mario Carraro, 19 - 36075 Montecchio Maggiore (VI) - Italy +39.0444.493494 - Fax +39.0444.492358 E-mail: [email protected] www.revimac.com

Open the catalog to page 1

DOSING SYSTEM for Cold-End Treatment End Treatment-2

Operating Principle Water at the required pressure flows through a meter and is conveyed into a purge tank. The metering pump feeds the pre-set quantity of chemical product straight into the static mixer and is then suppllied to the spraying unit. The electrical cabinet equipped with PLC controls the dosing unit and enables the adjustment of the concentration of the compound and the management of the alarm system. Easy to use. Minimum maintenance. Safey valve in case of circuit overpressure. OPTIONAL Reverse osmosis system. “Redundancy” of mixing system Technical Features Single-shop Inlet water...

Open the catalog to page 2