Page Bestsellers___________________________________________ 3 – 5 System components_________________________________ 6 – 41 bottBoxes and service cases__________________________42 – 97 Load restraint_____________________________________98 – 137

vario3 perfo panels with hook kit ■ Kit 16-piece ■ 1 perfo perforated panel width 457 x height 990 mm Replace ** with the number of your desired colour.

■ Used to secure large items in transit ■ Telescopic bar can be shortened or extended quickly without tools ■ Simple operation by means of Twist Lock when inserting. ■ Shoring pole is not spring loaded so there is never any clamping force applied to the roof or the side wall ■ Suitable for horizontal and vertical applications ■ Equal contact area across the entire length ■ Continuous, uniform diameter of the clamping bar that always ensures flat contact surface with transported goods ■ Circumferential rubber coating for increased slip-resistance as well as additional protection for the load.

vario3 Internal ladder holder ■ For installation on the roof liner to save space in the vehicle ■ Suitable for ladders with a length of 2 m, a maximum total step depth of 180 mm and a weight up to 20 kg ■ Extension kit can be ordered for ladder lengths of more than 2 metres ■ Adjustment to ladder length possible ■ Both ladder holder brackets can be folded upwards if not used ■ Material: aluminium / painted steel ■ Additional cab protection with flatbeds ■ Support for long items ■ Colour: anthracite grey (RAL 7016) zinc-plated and painted ■ Black plastic caps

Find the right divider material fast The size of the drawers in your bott vario3 van racking system follows a fixed gridtype system. This allows you to select matching divider material with ease. Just proceed as follows: System components System components Note on heights The height of your outer drawer front is decisive for the corresponding dividers and inserts. The respective product tables in this brochure therefore list the front height of the drawer. Please note that the front height of the drawer is used to select the appropriate product and does not correspond to the actual height of...

First, measure the clear width of the drawer body to determine the system width. This is indicated by the numbers 3 to 10 in the width table below. Now you can see where to find the relevant products in the brochure.

Drawer divider kit insert System width System depth Divider kit with small parts storage boxes System components System width System depth Front height of drawer [mm] System width System depth Front height of drawer [mm] System width System depth Front height of drawer [mm]

System depth Front height of drawer [mm] Divider kit System width System depth Front height of drawer [mm] Height of cross dividers [mm] System width System depth Front height of drawer [mm] Height of cross dividers [mm]

Divider kit sorting boxes System components System width System depth System width System depth

Drawer divider kit insert System width System depth

System width System depth Front height of drawer [mm] System width System depth Front height of drawer [mm]

System width System depth Front height of drawer [mm]

System width System depth Front height of drawer [mm] Divider kit sorting boxes System width System depth System width System depth

Custom tool shape cut-outs made by hand ■ Clear arrangement of tools, unique definition of storage locations and contents, missing parts are spotted immediately, cut-outs can be precisely made with the aid of the cutter set in a few simple steps ■ Material: Base: XPE 33, thickness 5 mm Inlay: PE 30, thickness 22 mm ■ Colour: Base: red Inlay: black ■ Properties: PE 30 laminated, heat-resistant up to 112 °C, non-combustible, resistant to oils, petrol and detergents, environmentally friendly

Divider kit with small parts storage boxes System width System depth Front height of drawer [mm] System width System depth Dimensions W x D [mm] Box height [mm] System components System width System depth Front height of drawer [mm]

System width System depth Dimensions W x D [mm] Front height of drawer [mm] Order ref. System width System depth Dimensions W x D [mm] Front height of drawer [mm] Order ref. System width System depth Front height of drawer [mm] Height of cross dividers [mm]

System width System depth Front height of drawer [mm] System components System width System depth Front height of drawer [mm] System width System depth Front height of drawer [mm] Height of cross dividers [mm]

Divider kit sorting boxes System width System depth

Custom tool shape cut-outs made by hand System components ■ Clear arrangement of tools, unique definition of storage locations and contents, missing parts are spotted immediately, cut-outs can be precisely made with the aid of the cutter set in a few simple steps ■ Material: Base: XPE 33, thickness 5 mm Inlay: PE 30, thickness 22 mm ■ Colour: Base: red Inlay: black ■ Properties: PE 30 laminated, heat-resistant up to 112 °C, non-combustible, resistant to oils, petrol and detergents, environmentally friendly Divider kit with small parts storage boxes System width System depth Front height of drawer...

varioa System width System depth Front height of drawer [mm] Divider kit System width System depth Front height of drawer [mm] Height of cross dividers [mm]

System width System depth Dimensions W x D [mm] Box height [mm] System width System depth Dimensions W x D [mm] Front height of drawer [mm] Order ref. System width System depth Dimensions W x D [mm] Front height of drawer [mm] Order ref.

Divider kit System width System depth Front height of drawer [mm] Height of cross dividers [mm] System width System depth Dimensions W x D [mm] Box height [mm]

Divider kit with small parts storage boxes System width System depth Front height of drawer [mm] System width System depth Front height of drawer [mm]

Divider kit System width System depth Front height of drawer [mm] Height of cross dividers [mm]