T HANDLES AND WINGNUTS
28Pages

{{requestButtons}}

Catalog excerpts

T HANDLES AND WINGNUTS - 1

FAMILY - L WINGNUTS AND T-HANDLES UPDATE 2013

Open the catalog to page 1
T HANDLES AND WINGNUTS - 3

T-HANDLE WITH FEMALE THREADED INSERT Reinforced polyamide. Oils and greases resistant. Surface: Satin. Main Insert: Brass blind threaded bush (tolerance 6H). Special request: • It is possible to supply the inserts in different materials, on request and for quantities. • It is possible to supply colours as shown in the table at pag. L-27, on request and for quantities. Presumable presence in the stock in % ( F ) 90%( J ) 40%( K ) 5%( L ) BOTECO ® - © All right reserved - www.boteco.it Any unathorized reproduction is strictly forbidden

Open the catalog to page 3
T HANDLES AND WINGNUTS - 4

T-HANDLE WITH FEMALE THREADED INSERT Reinforced polyamide. Oils and greases resistant. Surface: Satin. Main Insert: Stainless steel blind threaded bush (AISI 303). (tolerance 6H). Special request: • It is possible to supply colours as shown in the table at pag. L-27, on request and for quantities. Presumable presence in the stock in % www.boteco.it - © All right reserved - BOTECO ® Any unathorized reproduction is strictly forbidden

Open the catalog to page 4
T HANDLES AND WINGNUTS - 5

T-HANDLE WITH THREADED STUD Reinforced polyamide. Oils and greases resistant. Main Insert: Zinc plated steel threaded stud (tolerance 6g). SPECIAL REQUESTS: • It is possible to supply inserts in different lenghts or by special design, on request and for quantities. • It is possible to supply inserts in different materials, on request and for quantities. • It is possible to supply colours as shown in the table on page L-27, on request and for quantities. Enter the stud length choice in the two .. of the article code. Lengths by request with 250 pieces minimum quantity. LM = Maximum mouldable...

Open the catalog to page 5
T HANDLES AND WINGNUTS - 6

Reinforced polyamide. Oils and greases resistant. Main Insert: Stainless steel threaded stud (AISI 303). SPECIAL REQUESTS: • It is possible to supply inserts in different lenghts or by special design, on request and for quantities. • It is possible to supply colours as shown in the table on page L-27, on request and for quantities. T-HANDLE WITH THREADED STUD Enter the stud length choice in the two .. of the article code. Lengths by request with 500 pieces minimum quantity. LM = Maximum mouldable length. A.R. = by request. Presumable presence in the stock in % www.boteco.it - © All right...

Open the catalog to page 6
T HANDLES AND WINGNUTS - 7

T-HANDLE WITH PLASTIC THREADED HOLE Reinforced polyamide. Oils and greases resistant. Surface: Satin. Female threaded blind hole obtained by moulding the plastic. (tolerance in not applicable). Special request: • It is possible to supply colours as shown in the table at pag. L-27, on request and for quantities. Presumable presence in the stock in % ( F ) 90%( J ) 40%( K ) 5%( L ) BOTECO ® - © All right reserved - www.boteco.it Any unathorized reproduction is strictly forbidden

Open the catalog to page 7
T HANDLES AND WINGNUTS - 8

T-HANDLE WITH SMOOTH HOLE INSERT Poliammide rinforzata. Resistente ad olii e grassi. Boccola con foro liscio cieco in ottone. (tolleranza foro H7) ATTENZIONE: foro non allargabile. (*) Boccola con foro liscio cieco in acciaio zincato (tolleranza foro H11). Richieste Speciali: • Su richiesta e per quantità gli inserti possono essere forniti in materiale diverso. • Su richiesta e per quantità come da tabella a pag. L-27. Presumable presence in the stock in % www.boteco.it - © All right reserved - BOTECO ® Any unathorized reproduction is strictly forbidden

Open the catalog to page 8
T HANDLES AND WINGNUTS - 9

GALLETTI “euromodel”

Open the catalog to page 9
T HANDLES AND WINGNUTS - 10

L803-L803PIN "EUROMODEL" WINSNUT WITH THREADED THROUGH INSERT Reinforced polyamide. Oils and greases resistant. Main Insert: L803: Brass right through threaded bush. L803PIN: Stainless steel (AISI 303) right through threaded bush. SPECIAL REQUESTS: • It is possible to supply the inserts in different materials, on request and for quantities. • It is possible to supply the wingnuts with colours as shown in the table at page L-27 Version L803: Standard brass insert Version L803 PIN: Stainless steel insert , ^^^^^m Presumable presence in the stock in % www.boteco.it - © All right reserved -...

Open the catalog to page 10
T HANDLES AND WINGNUTS - 11

"EUROMODEL" WINGNUT WITH THREADED THROUGH INSERT Reinforced polyamide. Oils and greases resistant. Main Insert: L806: Brass right through threaded bush. L806PIN: Stainless steel (AISI 303) right through threaded bush. SPECIAL REQUESTS: • It is possible to supply the inserts in different ma- terials, on request and for quantities. • It is possible to supply the wingnuts with colours as shown in the table at page L-27, on request Version L806: Standard brass insert Version L806 PIN: Stainless steel insert Presumable presence in the stock in % www.boteco.it - © All right reserved - BOTECO ®...

Open the catalog to page 11
T HANDLES AND WINGNUTS - 12

L804-L804CIN "EUROMODEL" WINQNUT WITH Reinforced polyamide. Oils and greases resistant. Main Insert: L804: Zinc plated steel threaded stud. L804CIN: Stainless steel (AISI 303) threaded stud. Maximum mouldable length (LM): SPECIAL REQUESTS: • It is possible to supply the inserts with different lengths, on request and for quantities. • It is possible to supply the inserts in different materials, on request and for quantities. • It is possible to supply the wingnuts with colours as shown in the table at page L-27, on request Version L804: Zinc plated steel threaded stud LM = Maximum mouldable...

Open the catalog to page 12
T HANDLES AND WINGNUTS - 13

"EUSOMODEL" WINSNUT WITH L807-L807CIN THREADED STUD WITHOUT CAP Reinforced polyamide. Oils and greases resistant. Main Insert: L807: Zinc plated steel threaded stud. L807CIN: Stainless steel (AISI 303) threaded stud. Maximum mouldable length (LM): SPECIAL REQUESTS: • It is possible to supply the inserts with different lengths, on request and for quantities. • It is possible to supply the inserts in different materials, on request and for quantities. • It is possible to supply the wingnuts with colours as shown in the table at page L-27, Version L807: Zinc plated steel threaded stud LM =...

Open the catalog to page 13
T HANDLES AND WINGNUTS - 14

“euromodel” wingnut with smooth hole insert PROTECTED MODEL Reinforced polyamide. Oils and greases resistant. Alternative Cap Colour: Orange Blue Yellow Red Green Black Main Insert: L805: Brass right through bored bush with H9 tolerance. L805CIN: Stainless steel (AISI 303) right through bored bush with H9 tolerance. special requests: • It is possible to supply the inserts in different materials, on request and for quantities. • It is possible to supply the wingnuts with colours as shown in the table at page L-27, on request and for quantities. Version L805: Standard brass insert Version...

Open the catalog to page 14

All Boteco catalogs and technical brochures

  1. L274HIN

    1 Pages

  2. Family E

    24 Pages

  3. Family C

    12 Pages

  4. Family D

    20 Pages

  5. Family B

    38 Pages

  6. Family A

    34 Pages

  7. T558

    1 Pages

  8. T559

    2 Pages

  9. T710

    1 Pages

  10. T200

    1 Pages

  11. B230

    1 Pages

  12. A593CIN

    1 Pages

  13. A593

    1 Pages

  14. A592CIN

    1 Pages

  15. A592

    1 Pages

  16. A583CIN

    1 Pages

  17. A583

    1 Pages

  18. A582CIN

    1 Pages

  19. A582

    1 Pages

  20. A581

    1 Pages

  21. A580

    1 Pages

  22. A573

    1 Pages

  23. A572

    1 Pages

  24. A563CIN

    1 Pages

  25. A563

    1 Pages

  26. A562CIN

    1 Pages

  27. A562

    1 Pages

  28. A530

    1 Pages

  29. A529

    1 Pages

  30. A528

    1 Pages

  31. A525

    1 Pages

  32. A524

    1 Pages

  33. A523

    1 Pages

  34. A522

    1 Pages

  35. A151

    1 Pages

  36. A150

    1 Pages

  37. B221

    1 Pages

  38. A149

    1 Pages

  39. A148

    1 Pages

  40. PLASTIC CRANKS

    24 Pages

  41. KNURLED KNOBS

    20 Pages

  42. CONTROL KNOBS

    20 Pages

  43. MOUNTING FEET

    32 Pages

  44. METAL LINE

    20 Pages

  45. BALL PLUNGERS

    24 Pages

  46. PLUNGERS

    20 Pages