PROTECTED MODEL RoHS*' COMPLIANT "EUROMODEL” FIXED LEVER WITH SMOOTH BORED INSERT Material: Special high resistance glass fiber reinforced technopolymer. Oils and greases resistant. Surface: Satin. Colour: Black (RAL 9011). Central Cap: grey polyamide (RAL 7035). Main Insert: Zinc plated steel insert, with right through smooth bore (bore tolerance H10). Alternative cap colours: Orange (RAL 2004 cod. 02) SPECIAL REQUESTS: • Fixing springs and balls ( zinc plated steeljavailable upon request. • It's possible to supply the inserts with d1 diameter by customer design, on request and for quantities. • It's possible to supply the inserts with different materials, on request and for quantities. • It's possible to supply the inserts with different treatment, on request and for quantities. • It's possible to supply the lever body and cap with colours as shown in the table at page A-31 on request and for quantities. Attention: bore d1 (H10 tolerance) could be produced by request, with 100 pieces minimum. Dm = It's possible to increase the hole, by boring, until Dm (enlarge). Presumable presence in the stock in % F